Create a select menu with smenu
Not Spoiled for Choice
The smenu tool reduces the effort of creating shell menus to one line, with numerous options for a wide range of design alternatives.
If you program for the shell frequently, sooner or later you will have to create a select menu, which usually requires several lines of code – unless you use smenu. Smenu reduces the menu's script to a single line. A number of parameters allow you to adapt the design and to simplify your work a little.
The source code for smenu is available on its project page [1], which contains installation instructions, as well as some useful tips. The smenu wiki [2] contains links to two YouTube videos that demonstrate the practical use of the program. The README file provides a structured overview of smenu's options [1].
Basic Function
In smenu's simplest form, a command's output is passed via pipe to the smenu
command. For example, <command>
| smenu
displays a selection on a single line. To create a line-by-line menu, use <command>
| smenu -c
(Figure 1).
For a freely defined menu, transfer the selection options using the echo
command. However, the examples in Figure 2 only show the most rudimentary form: It doesn't make sense to use the tool without variables.
1 lists the most important call options for smenu. Press Enter to select a menu option, and press Q to exit the menu without selecting. To search within the selection, use the forward slash (/) in the open menu and then enter the search term.
When the search completes, the cursor stops at the first hit, and the background appears blue instead of black. If you wait seven seconds, the software reverts back and waits for your next input. Typically, the selection results from the data obtained via the pipe.
Script Use
To use the result of the selection, apply command substitution, as shown in Listing 1, line 1 (current syntax) and line 2 (obsolete syntax). Listing 2 and Listing 3 show two functional examples, and Figure 3 shows their usage.
Listing 1
Command Substitution
VARIABLE=$([COMMAND] | smenu) VARIABLE=`[COMMAND] | smenu`
Listing 2
A Selection with Explanations
#!/bin/sh a=$(echo "1 first \n 2 second \n 3 third \n" | smenu -c) echo "input value: $a"
Listing 3
Selecting a File
#!/bin/sh b=$(ls *.txt | smenu -c) echo "Selected file: $b"
Table 1
smenu Options
Option | Action | Tip/Example |
---|---|---|
|
Column mode |
|
|
Heading |
|
|
Limit lines in selection |
|
|
Center menu |
|
|
Delete menu according to selection on the screen |
– |
|
Selection with several columns |
|
|
Selection with multiple columns at full terminal width |
Together with |
|
Allow multiple selections |
|
|
Exclude the transferred string from the selection |
|
|
Only allow designated strings to select |
Listing 4
Specifying the Heading
#!/bin/sh clear a=$(ls -1 *.txt | smenu -n3 -c -m "Select file:") echo "Selected file: $a"
Listing 5
The -t Option
#!/bin/sh clear a=$(ls -1 *.txt | smenu -n3 -c -m "Select file:" -t2) echo "Selected file: $a"
Listing 6
Using a Colon as a Field Separator
#!/bin/sh clear a=$(ls -1 *.txt | smenu -n5 -T: -c -m "Select file(s) (mark with [T]):") echo "Selected file(s): $a"
Listing 7
The -e Option
#!/bin/sh clear a=$(ls -1 | smenu -n5 -c -e [m][4] -m "Select file: ") echo "Selected file: $a"
Listing 8
The -i Option
#!/bin/sh clear a=$(ls -1 | smenu -n5 -c -i [t][x][t] -m "Select file: ") echo "Selected file: $a"
Listing 2 demonstrates how to establish a selection with explanations. The end-of-line symbol (newline), which you represent with an escape sequence (\n
), serves as a separator between the entries. Within an entry, the space serves as a separator between fields. The result adopted in the variable is the value from the first column. Smenu only inverts the current value of the variable on the screen, not the full line.
Listing 3 shows just how easily users can select a file interactively.
Improvements
Figure 4 shows a small menu, which already has some additional features. If the list of entries reaches a certain number of lines, a green scrollbar appears.
If you limit the number of visible lines to three with -n3
, the bar appears as soon as the length of the list exceeds this value. Use the -m "<text>"
option to specify the heading. Listing 4 shows the corresponding code.
Look at the scrollbar in Figure 4 more closely: If you reach the start or the end of the selection, the arrow symbol appears. The arrows indicate more entries in the respective directions.
If you need a selection with multiple columns, type the number of columns using the -t
option (Listing 5). Figure 5 shows the result on the terminal screen. If you want to expand the line content to the terminal's full width, use the -w
option.
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
Canonical Bumps LTS Support to 12 years
If you're worried that your Ubuntu LTS release won't be supported long enough to last, Canonical has a surprise for you in the form of 12 years of security coverage.
-
Fedora 40 Beta Released Soon
With the official release of Fedora 40 coming in April, it's almost time to download the beta and see what's new.
-
New Pentesting Distribution to Compete with Kali Linux
SnoopGod is now available for your testing needs
-
Juno Computers Launches Another Linux Laptop
If you're looking for a powerhouse laptop that runs Ubuntu, the Juno Computers Neptune 17 v6 should be on your radar.
-
ZorinOS 17.1 Released, Includes Improved Windows App Support
If you need or desire to run Windows applications on Linux, there's one distribution intent on making that easier for you and its new release further improves that feature.
-
Linux Market Share Surpasses 4% for the First Time
Look out Windows and macOS, Linux is on the rise and has even topped ChromeOS to become the fourth most widely used OS around the globe.
-
KDE’s Plasma 6 Officially Available
KDE’s Plasma 6.0 "Megarelease" has happened, and it's brimming with new features, polish, and performance.
-
Latest Version of Tails Unleashed
Tails 6.0 is based on Debian 12 and includes GNOME 43.
-
KDE Announces New Slimbook V with Plenty of Power and KDE’s Plasma 6
If you're a fan of KDE Plasma, you'll be thrilled to hear they've announced a new Slimbook with an AMD CPU and the latest version of KDE Plasma desktop.
-
Monthly Sponsorship Includes Early Access to elementary OS 8
If you want to get a glimpse of what's in the pipeline for elementary OS 8, just set up a monthly sponsorship to help fund its continued existence.