Building Frames
Go with lavfi
Generating a GIF in two steps – generating the palette and then applying it – is not elegant. Besides, it leaves behind a PNG file that is useless for anything else.
Thanks to the lavfi
virtual device, you can do everything in one go (Listing 2), which has the advantage of making you look like a veritable FFmpeg wizard, without generating any PNG cruft to boot.
Listing 2
One-Step GIF Generation
At this stage, it should be clear what is going on, but for the sake of clarity:
- The
clip_gray.mp4
file is the grayscale and scaled-down video you want to convert. - The
lavfi
filter options in quotation marks generate the palette image and pipe it through[out]
to the … - …
-filter_complex
chain of filters.
Apart from using the palette you created with the lavfi
virtual device, you reduce the frame rate to 10 frames per second and push the resulting frames out to clip_gray.gif
.
The resulting GIF image is smooth, acceptably lightweight, and created in seconds.
Conclusion
Not surprisingly, FFmpeg is the back end for so many video editing applications: The number of things you can do with it is astounding. Although it is true that some of the command lines you have to generate can be eye-wateringly complex, it is often worth working directly with FFmpeg, because it gives you that extra control on the final result. Apart from lavfi, you can learn more about FFmpeg devices by taking a look at the "More Devices" box.
More Devices
Apart from lavfi
, a few other FFmpeg devices are worth investigating, especially if you want a raw, but very reliable way of grabbing streams from your camera or desktop:
(1) video4linux2
, or v4l2
[4] for short (you can use either), captures streams from your webcam. To work out what devices you have on which to capture streams, run ls /dev/video*
. My laptop has, apart from its built-in webcam, an external webcam with its own microphone, so I see:
> ls /dev/video* /dev/video0 /dev/video1
If you run ffplay -f v4l2 -i /dev/video1
, a window pops up showing the feed from the external webcam.
(2) On a related note, alsa
[5] and pulse
[6] capture audio. To know which device to capture audio from, if you want to use alsa
, enter arecord -l
. Again, on my laptop, apart from the built-in microphone, I have the microphone attached to the external webcam and a microphone input on an external USB sound card, so I see:
> arecord -l **** List of CAPTURE Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC3241 Analog [ALC3241 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: Device [USB Sound Device], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: H2300 [HP Webcam HD 2300], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0
If I want to record from the microphone on the webcam, I can see it is card 2 (HP Webcam HD 2300) connected to device 0. This means ffmpeg -f alsa -i hw:2,0 voice.mp3
records to a file called voice.mp3
.
With pulse
, things are a bit different. First, you need to find out the name of your devices:
> pactl list sources Source #2 State: SUSPENDED Name: alsa_input.usb-Hewlett_Packard_HP_Webcam_HD_2300-02.analog-stereo Description: HP Webcam HD 2300 Analog Stereo Driver: module-alsa-card.c Sample Specification: s16le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 7 Mute: no Volume: front-left: 48497 / 74% / -7.85 dB, front-right: 48497 / 74% / -7.85 dB balance 0.00 Base Volume: 41350 / 63% / -12.00 dB Monitor of Sink: n/a Latency: 0 usec, configured 0 usec Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY[...]
Once you have located the device from which you want to record, you can then use its name in FFmpeg:
ffmpeg -f pulse -i alsa_input.usb-Hewlett_Packard_HP_Webcam_HD_2300-02.analog-stereo voice.mp3
In this case, it captures from an external webcam microphone and records to voice.mp3
.
(3) x11grab
[7] is interesting if you want to make screencasts. You can grab the whole screen, just a rectangle, or a rectangle centered around the cursor. For example, the line
ffmpeg -f x11grab -follow_mouse centered -framerate 25 -video_size 640x480 -i :0.0 screncast.mp4
captures a 640x480
region centered around the mouse and records it to screencast.mp4
.
You can mix and match all the above devices and apply all sorts of effects to the streams they produce. Altogether, they provide a very complete and complex screencasting solution.
Infos
- FFmpeg colors: https://ffmpeg.org/ffmpeg-all.html#Color
- "Tutorials – FFmpeg" by Paul Brown, Linux Magazine, issue 206, January 2018, pg. 92, http://www.linux-magazine.com/Issues/2018/206/Tutorials-FFmpeg
- Big Buck Bunny: https://peach.blender.org/
- video4linux2 device: https://www.ffmpeg.org/ffmpeg-devices.html#video4linux2_002c-v4l2
- alsa device: https://www.ffmpeg.org/ffmpeg-devices.html#alsa
- pulse device: https://www.ffmpeg.org/ffmpeg-devices.html#pulse
- x11grab device: https://www.ffmpeg.org/ffmpeg-devices.html#x11grab
« Previous 1 2
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
Fedora 40 Beta Released Soon
With the official release of Fedora 40 coming in April, it's almost time to download the beta and see what's new.
-
New Pentesting Distribution to Compete with Kali Linux
SnoopGod is now available for your testing needs
-
Juno Computers Launches Another Linux Laptop
If you're looking for a powerhouse laptop that runs Ubuntu, the Juno Computers Neptune 17 v6 should be on your radar.
-
ZorinOS 17.1 Released, Includes Improved Windows App Support
If you need or desire to run Windows applications on Linux, there's one distribution intent on making that easier for you and its new release further improves that feature.
-
Linux Market Share Surpasses 4% for the First Time
Look out Windows and macOS, Linux is on the rise and has even topped ChromeOS to become the fourth most widely used OS around the globe.
-
KDE’s Plasma 6 Officially Available
KDE’s Plasma 6.0 "Megarelease" has happened, and it's brimming with new features, polish, and performance.
-
Latest Version of Tails Unleashed
Tails 6.0 is based on Debian 12 and includes GNOME 43.
-
KDE Announces New Slimbook V with Plenty of Power and KDE’s Plasma 6
If you're a fan of KDE Plasma, you'll be thrilled to hear they've announced a new Slimbook with an AMD CPU and the latest version of KDE Plasma desktop.
-
Monthly Sponsorship Includes Early Access to elementary OS 8
If you want to get a glimpse of what's in the pipeline for elementary OS 8, just set up a monthly sponsorship to help fund its continued existence.
-
DebConf24 to be Held in South Korea
Busan will be the location of the latest DebConf running July 28 through August 4