User-level firewalling with Portsmith
The most critical issue with Portsmith security is that the web server is permanently accessible, more particularly so because it uses the PHP scripting language. If an attacker can compromise the authentication feature because of a vulnerability in the programming or the PHP language itself, the whole network becomes vulnerable.
The database link is another potential target. For example, imagine a black hat launching an SQL injection attack to "modify" the ruleset, making the protection the firewall is supposed to provide fairly useless.
Although research into Portsmith's PHP has not revealed any potential vulnerabilities, one cannot rule out the possibility of a successful attack. It goes without saying that you should update often. For more protection, you might also want to install Suhosin  or ModSecurity  to give you some defense against zero-day exploits.
The system is based on allowing an authenticated client's IP address for a connection. The source IP arriving at port 443 on the web server is referenced to ascertain the address. This behavior is also a potential source of danger: In the simplest case, the client might be unaware that it is hiding behind a proxy that sets up a connection to the Portsmith firewall for the web browser. This would lead to the proxy address, rather than the client address, being enabled. In turn, this scenario means that any user on the proxy is assigned the same privileges as the user client-side and, thus, can access the client user's resources.
A situation in which an attacker works through a compromised proxy server would be even worse. Considering how long the period of access is granted, this would again leave a gaping hole open for attacks.
Portsmith is a practical supplement to a conventional firewall. The solution adds dynamic, predefined enabling to the traditionally static ruleset, allowing users to initiate changes. One potential use would be hardening access to an internal web mailer or other services, such as Sun Secure Global Desktop . With encrypted connections, Portsmith could serve as a VPN replacement. If you prefer a genuine VPN solution, you can easily add IPSec software, such as strongSwan  or OpenVPN .
Simply using Portsmith to grant SSH firewall access to a restricted group of users is very much over the top. Port knocking  is a simpler and more secure alternative. Users with dynamic IP addresses need to rely on manual techniques or an external tool such as a DynDNS service to update the configuration with an active, official IP address.
The default ruleset poses a couple of questions and could definitely be improved in places. Fortunately, changes are made easily, although a change does require manual editing of the Portsmith configuration files. Manual editing can cause complications when you update.
With respect to authentication, Portsmith unfortunately relies on its own database-oriented approach. Use of an RSA token system or single sign-on would be preferable. This would not only mean more convenience for the user, but (especially in the case of RSA) also an extra layer of security.
It would also be useful to introduce time-based controls to automatically lock temporary accounts, for example, or restrict logins to normal office hours for some users. One would hope that the system is flexible enough to support extensions of this kind.
All told, and assuming a working basic configuration and more hardening, Portsmith is a useful extension to any iptables-based firewall that is likely to make life easier for both administrators and users.
A firewall is only as good as the ruleset implemented by its packet filter. In Portsmith's case, the default policy is similar to Listing 1.
The internal network, 192.168.2.0/24, which is hiding behind the eth1 interface, can access the big, bad Internet without restrictions with port address translation. This approach might be fine for a home network or a small commercial setup, but it also poses many dangers.
The Portsmith homepage states "… all external ports are blocked until released after login," but the reality is a bit more complicated. Not only are ports 80 and 443 open for access to websites, but port 25 is open for mail traffic. On the other hand, any ICMP traffic reaching the external interface is blocked, although this sacrifices important troubleshooting information.
Portsmith uses the RELATED and ESTABLISHED states advantageously to automatically (statefully) allow the backchannel for existing TCP and DNS connections from the internal network. Source NAT, which is enabled for a generic IP address (192.168.1.250) poses more questions (Listing 2).
This appears to be the remnants of a forward to the LPD port of an internal print server. Although TCP port 9100 is blocked by default, the entry could cause hard-to-find problems in a similar setup.
Fortunately, you can modify the basic policy to match your own needs. Simply delete the defaults from /usr/local/bin/fw_policy, or customize to create as complex an initial ruleset as you like. If you do not have basic iptables skills, you should turn to an expert for help.
After logging in a user and enabling an SSH connection for the user, the INPUT chain was extended as in Listing 3.
As you can see, dynamic rules come first. This avoids potential conflict with more generic existing rules. The destination (0.0.0.0) for the new rule is somewhat disturbing, in that Portsmith's own policy states that it should be restricted to an external IP.
Chain INPUT (policy DROP 22 packets, 3590 bytes) pkts bytes target prot opt in out source destination 7 476 ACCEPT all -- eth1 * 192.168.2.0/24 0.0.0.0/0 200 17460 ACCEPT all -- lo * 127.0.0.1 0.0.0.0/0 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/sec burst 5 tcp dpt:80 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/sec burst 5 tcp dpt:25 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/sec burst 5 tcp dpt:443 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 1 62 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 15/sec burst 5 udp spt:53 state RELATED,ESTABLISHED 0 0 ACCEPT icmp -- * * 192.168.2.0/24 0.0.0.0/0 limit: avg 5/sec burst 5 Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- * * 192.168.2.0/24 0.0.0.0/0 0 0 ACCEPT all -- * * 127.0.0.1 0.0.0.0/0 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED Chain OUTPUT (policy ACCEPT 233 packets, 21730 bytes) pkts bytes target prot opt in out source destination
01 Chain PREROUTING (policy ACCEPT 1603 packets, 117K bytes) 02 pkts bytes target prot opt in out source destination 03 0 0 DNAT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:9100 to:192.168.1.250:9100
01 Chain INPUT (policy DROP 122 packets, 14737 bytes) 02 pkts bytes target prot opt in out source destination 03 85 7589 ACCEPT tcp -- eth0 * 192.168.0.10 0.0.0.0/0 tcp dpt:22 04 14 961 ACCEPT all -- eth1 * 192.168.2.0/24 0.0.0.0/0 05 2497 640K ACCEPT all -- lo * 127.0.0.1 0.0.0.0/0 06 23 3652 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/sec burst 5 tcp dpt:80 07 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/sec burst 5 tcp dpt:25 08 262 37622 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/sec burst 5 tcp dpt:443 09 114 22241 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 10 3 204 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 15/sec burst 5 udp spt:53 state RELATED,ESTABLISHED 11 0 0 ACCEPT icmp -- * * 192.168.2.0/24 0.0.0.0/0 limit: avg 5/sec burst 5
- Portsmith: http://ddbolt.net/portsmith.php
- Ubuntu server download: http://www.ubuntu.com/getubuntu/download
- Apache Web Server: http://httpd.apache.org
- Hypertext preprocessor: http://www.php.net
- PostgreSQL: http://www.postgresql.org
- Portsmith download: http://ddbolt.net/downloads/Install_CD
- DynDNS: http://www.dyndns.org
- Suhosin: http://www.hardened-php.net/suhosin.127.html
- ModSecurity: http://www.modsecurity.org
- Sun Secure Global Desktop: http://www.sun.com/software/products/sgd/index.jsp
- strongSwan: http://www.strongswan.org
- OpenVPN: http://openvpn.net
- Port Knocking: http://en.wikipedia.org/wiki/Port_knocking
Buy this article as PDF
New tool will look like GParted but support a wider range of storage technologies.
New public key pinning feature will help prevent man-in-the-middle attacks.
Carnegie Mellon researchers say 3 million pages could fall down the phishing hole in the next year.
The US government rolls new best-practice rules for protecting SSH.
Klaus Knopper announces the latest version of his iconic Live Linux system.
All websites that use these popular CMS tools could be vulnerable to denial of service attacks if users don't install the updates.
According to a report, many potential victims of the Heartbleed attack have patched their systems, but few have cleaned up the crime scene to protect themselves from the effects of a previous intrusion.
DARPA and NICTA release the code for the ultra-secure microkernel system used in aerial drones.
Should you trust an online service to store your online passwords?
New B+ board lets you build cool things without the complication of a powered USB hub.