Dissecting network traffic
wireshark, libpcap, packets, packet sniffer

Building a network flight recorder with Wireshark.
Wireshark [1], the packet sniffer formerly known as Ethereal, is a must-have for system administrators. If you've ever had to troubleshoot a network problem or needed to watch a transaction with a server, then this is the tool for you. Like most (all?) network data capture programs for Linux, Wireshark relies on libpcap, which provides a system-independent interface for capturing packets; therefore, you do not need to write custom routines for every packet sniffer (tcpdump, Snort, Wireshark, etc.). As long as your OS (e.g., Linux, *BSD, HP-UX, Solaris, Windows, etc.) and software support libpcap, you can sniff packets to your heart's content.
Installing libpcap and Wireshark
Libpcap comes with most operating systems, and Wireshark is almost always included (at least on Linux and BSD). Wireshark is sometimes split into two separate packages: one consisting of the back-end utilities like tshark and mergecap, and the other consisting of the graphical user interface (GUI). On Fedora and most related systems, you can simply run yum:
yum install libpcap yum install wireshark-gnome
Debian is just as easy:
apt-get install libpcap0 apt-get install wireshark
One problem with using a vendor-supplied version of Wireshark is that most vendors ship really old versions of Wireshark (e.g., Fedora 11 ships v1.1.3). However, the 1.2 series (and v1.3.0, which might be out by the time this article prints) has a lot of new features, such as protocol support, bug fixes, and GeoIP integration (more on this later). To build Wireshark from source, you'll need to download it, so you can either pull the latest stable version [2], or, if you're feeling brave, you can get one of the latest automated builds from SVN [3]. Once you have unpacked it, the installation is pretty simple:
./configure make make install
To compile Wireshark, you will need to address some dependencies. At a minimum, you'll want libpcap; I also suggest installing GnuTLS, PCRE (Perl-Compatible Regular Expressions), and GeoIP if you want to use any of the advanced features.
Running Wireshark
Unfortunately, to run Wireshark and capture live data, you need to run it as root. Wireshark has had security problems in the past (more on this later) that allow remote attackers to execute code by sending malicious data, which Wireshark processes. Two ways to avoid running Wireshark as root are relatively simple. The first is to use a packet capture program, such as dumpcap or tcpdump, and then later examine the capture files while running Wireshark as a regular user.
The second method is to run Wireshark as root, but within a contained environment. While running Wireshark within a VMware server-based virtual machine, I originally assumed that Wireshark would only see network data to and from that specific virtual machine. Why I thought this isn't clear (just being hopeful, I guess). In fact, because libpcap accesses the kernel and thus the network card at a low enough level, it will see all network traffic to and from that physical interface. Thus, you can run Wireshark in a VM and easily sniff network traffic. The downside of this is that any rogue user with root access to a VM (at least under VMware Server) can see all the network traffic to the underlying physical machine and any guest VM using that interface.
Libpcap Capture Filters
Capturing network traffic on anything but the most quiet of networks is a lot like drinking from a fire hose. The good news is that almost all programs that use libpcap to capture data also accept filter libpcap filter commands (and sometimes, like Wireshark, support their own filters as well). The bad news is that libpcap's filter set is relatively limited, primarily supporting network addresses and ports (because it is protocol aware). At a minimum, you can use it to minimize the amount of data you're writing to the hard drive or forcing Wireshark to process. For example, to capture web traffic in libpcap, you could use the following syntax:
dst port 80 or 443
The tcpdump man page covers libpcap filter syntax in depth.
Buy Linux Magazine
Direct Download
Read full article as PDF:
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
News
-
An All-Snap Version of Ubuntu is In The Works
Along with the standard deb version of the open-source operating system, Canonical will release an-all snap version.
-
Mageia 9 Beta 2 Ready for Testing
The latest beta of the popular Mageia distribution now includes the latest kernel and plenty of updated applications.
-
KDE Plasma 6 Looks to Bring Basic HDR Support
The KWin piece of KDE Plasma now has HDR support and color management geared for the 6.0 release.
-
Bodhi Linux 7.0 Beta Ready for Testing
The latest iteration of the Bohdi Linux distribution is now available for those who want to experience what's in store and for testing purposes.
-
Changes Coming to Ubuntu PPA Usage
The way you manage Personal Package Archives will be changing with the release of Ubuntu 23.10.
-
AlmaLinux 9.2 Now Available for Download
AlmaLinux has been released and provides a free alternative to upstream Red Hat Enterprise Linux.
-
An Immutable Version of Fedora Is Under Consideration
For anyone who's a fan of using immutable versions of Linux, the Fedora team is currently considering adding a new spin called Fedora Onyx.
-
New Release of Br OS Includes ChatGPT Integration
Br OS 23.04 is now available and is geared specifically toward web content creation.
-
Command-Line Only Peropesis 2.1 Available Now
The latest iteration of Peropesis has been released with plenty of updates and introduces new software development tools.
-
TUXEDO Computers Announces InfinityBook Pro 14
With the new generation of their popular InfinityBook Pro 14, TUXEDO upgrades its ultra-mobile, powerful business laptop with some impressive specs.