Measuring performance with the perf kernel tool
Inside Job
The kernel supports performance analysis with built-in tools via the Linux performance counters subsystem. perf is easy to use and offers a detailed view of performance data.
Making systems faster is a core part of business. Optimizing resources in data centers can save energy, space, and costs, and, out in the real world, a faster start-up time can improve the user experience for an entertainment system in the living room or even a car in the driveway.
In complex systems with many components, performance problems can stem from many different causes. On the hardware side, the CPU, RAM, the bus load, the memory system (block I/O), or the network can contribute to performance issues. On the software side, the operating system, the execution environment of the programming language, libraries, or the application itself can create bottlenecks. The fact that these components also often influence each other makes things more difficult. Although the systems work without any problems on their own, their interaction leads to friction.
To identify the root cause in the interaction of all these components requires the observer to take a bird's eye view and also have detailed knowledge of all the components. Not many IT professionals combine these skills, thus making performance optimization an exciting but challenging activity.
Fortunately, several useful tools are available for monitoring performance issues, including well-known utilities such as ps
, stat
, top
, htop
, OProfile [1], SystemTap [2], and so on.
One of the most useful performance monitoring tools is perf
[3], which has been part of the kernel since version 2.6.31. perf
uses the kernel's performance counter subsystem and supports both profiling and tracing.
During profiling, Perf evaluates data from hardware registers that count specific hardware events. Thus, it generates statistics at certain times in order to gain an impression of the system. The accuracy depends on the frequency of measurement.
In tracing, however, perf
logs certain events using trace points. These include software events such as context changes, but also hardware events such as executed instructions, cache requests, and so on. System messages are also included.
Admins and developers should keep in mind that tracing can have a major influence on the system. In general, you need to take into account that the measurements themselves can influence the measurement results.
Installation
The perf
program is part of the Linux kernel and located in the tools/perf
directory. As the output from make tools/help
shows, you can install with make -C perf_install
. You can also simply change the directory to /usr/src/<Linux_version>/tools/perf
and execute make
there.
Because certain perf
functions depend on the Linux application binary interface (ABI), distributions often ship one package per kernel version. Under Ubuntu 18.10, the linux-tools-generic
package always installs the appropriate perf
version.
If you want meaningful output, you also need to install the debug symbols for the programs you wish to example – just as you would with a debugger. The debug symbols are usually stored in separate archives. The packages automatically generated on Debian and Ubuntu 18.10 have an extension of -dbgsym
, and the manually generated packages have an extension of -dbg
.
Workflow
perf
supports more than two dozen subcommands. For an overview, type the command without any parameters or check out the perf
wiki [4]. People who use perf
usually start with perf list
. This command displays the available events (Listing 1), which you can then count with perf stat
. The record
command writes data to the hard disk; report
displays the data for searching. script
supports further evaluation of the data at the end.
Listing 1
Outputting Hardware Events (excerpt)
01 $ sudo perf list hardware 02 03 List of pre-defined events (to be used in -e): 04 05 branch-instructions OR branches [Hardware event] 06 branch-misses [Hardware event] 07 bus-cycles [Hardware event] 08 cache-misses [Hardware event] 09 [...]
Events
The Admin perf list
command also gives an optional argument on request (refer to Listing 1). This argument may be the type of the event, for example hw
or tracepoint
, or a regular expression, as in Listing 2.
Listing 2
Events at Block Level (excerpt)
01 $ sudo perf list 'block:*' 02 03 List of pre-defined events (to be used in -e): 04 05 block:block_bio_backmerge [Tracepoint event] 06 block:block_bio_bounce [Tracepoint event] 07 block:block_bio_complete [Tracepoint event] 08 block:block_bio_frontmerge [Tracepoint event] 09 block:block_bio_queue [Tracepoint event] 10 [...]
Each end of line contains the event type in square brackets. In addition, you normally have to look into the source code to see the exact meaning of the event. You can use the --events
or -e
switch to state the events to be considered.
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
Fedora 41 Released with New Features
If you're a Fedora fan or just looking for a Linux distribution to help you migrate from Windows, Fedora 41 might be just the ticket.
-
AlmaLinux OS Kitten 10 Gives Power Users a Sneak Preview
If you're looking to kick the tires of AlmaLinux's upstream version, the developers have a purrfect solution.
-
Gnome 47.1 Released with a Few Fixes
The latest release of the Gnome desktop is all about fixing a few nagging issues and not about bringing new features into the mix.
-
System76 Unveils an Ampere-Powered Thelio Desktop
If you're looking for a new desktop system for developing autonomous driving and software-defined vehicle solutions. System76 has you covered.
-
VirtualBox 7.1.4 Includes Initial Support for Linux kernel 6.12
The latest version of VirtualBox has arrived and it not only adds initial support for kernel 6.12 but another feature that will make using the virtual machine tool much easier.
-
New Slimbook EVO with Raw AMD Ryzen Power
If you're looking for serious power in a 14" ultrabook that is powered by Linux, Slimbook has just the thing for you.
-
The Gnome Foundation Struggling to Stay Afloat
The foundation behind the Gnome desktop environment is having to go through some serious belt-tightening due to continued financial problems.
-
Thousands of Linux Servers Infected with Stealth Malware Since 2021
Perfctl is capable of remaining undetected, which makes it dangerous and hard to mitigate.
-
Halcyon Creates Anti-Ransomware Protection for Linux
As more Linux systems are targeted by ransomware, Halcyon is stepping up its protection.
-
Valve and Arch Linux Announce Collaboration
Valve and Arch have come together for two projects that will have a serious impact on the Linux distribution.