High-resolution network monitoring with ping
The Pinger Program
To use these observations in practice for long-term monitoring of network connections, I wrote the Pinger [5] command-line program, which calls the ping executable installed on a system only once per second in the current version.
On the gigabit LAN, Pinger thus normally achieves adequate resolution for a daily average RTT of (as low as) 153ns, which corresponds to around 15 meters of cable length. The 1,000-second average provides a resolution of (as low as) 1.5µs, which is equivalent to 1/20th of the additional latency from the gigabit switch. To monitor 1,000 connections with a 28-byte ping, the C program only needs 2*28KBps of bandwidth. For a higher resolution, users can modify the Pinger source code to ping faster – for example, every millisecond.
The program consists of a main thread that starts 10 threads, each of which sends and evaluates a ping every other second. A couple of other functions perform analysis and output. To avoid manipulation of the pings, the program fills each with a 128-bit random number. They are also flagged don't fragment
so that ping sends them in one piece.
Smoothed
Pinger only outputs the exponential moving averages in the current version. Compared with the arithmetic mean values (i.e., the values for the last n measurements), you reach a much shorter delay with the same degree of smoothing, or the same delay with considerably better smoothing. The disadvantage is that exponential smoothing keeps old values for a long time (exponential decay), whereas the arithmetic mean values no longer consider the old values after n measurements.
To visualize short-term, medium-term, and long-term changes in the RTT and the return values from ping, the averaging uses smoothing factors 0.1, 0.001, and 1/86,400, for (exponential) 10-second, 1,000-second, and daily mean values, respectively. If you want, you can compute other parameters from this – for example, the standard deviation and other moments of the distribution function – also with smoothing if needed.
Program Start
Pinger source code [5] can be compiled using the command
gcc -D_REENTRANT -Wall -O3 -lm -pthread -o pinger \ pinger.c && strip pinger
to create the pinger
executable. You need to launch the resulting program as root for high priority. It expects three parameters: the IP of the target computer, the cut-off RTT in nanoseconds, and the net ping size in bytes:
./pinger 192.168.1.1 400000 16
For troubleshooting purposes, the program writes run times to rtt*
files and the ping return values to retval*
files in the working directory. The plotting3.sh
[5] GNU plot script is used for evaluation in the form of a 2D plot:
./plotting3.sh rtt_10s_16B_192.168.1.1.txt | gnuplot
It refreshes the display every second, so you can also follow a live session.
Buy this article as PDF
(incl. VAT)