Build a VPN Tunnel with WireGuard

Uncomplicated

© Lead Image © Roman Sakhno, 123RF.com

© Lead Image © Roman Sakhno, 123RF.com

Article from Issue 237/2020
Author(s):

A recent addition to the Linux kernel, WireGuard lets you build a VPN tunnel that relies on encryption to reduce potential security issues.

As a result of the COVID-19 pandemic, many employees have exchanged the office for their home to accommodate social distancing guidelines. In addition to getting used to working from home, many telecommuters must also deal with security issues when contacting colleagues or accessing company servers. While large corporations may take care of these issues for their employees, self-employed telecommuters and small businesses need to find their own solution.

WireGuard [1], the modern virtual private network (VPN) tunnel software developed by security researcher Jason Donenfeld, offers an easy-to-implement solution that relies on encryption to secure the connection between two endpoints. WireGuard found its way into the Linux kernel 5.6 at the end of March at the same time WireGuard v1.0.0 was released. The VPN program is now available for all common operating systems such as Linux, macOS, Windows, Android, and iOS.

Competition

Before WireGuard conquered the market in 2015, IPsec and OpenVPN were the top two contenders under a free license. Compared to WireGuard, however, both IPsec and OpenVPN are more difficult to set up, which is why WireGuard was already in use before becoming a kernel module.

Linux Torvalds had hoped WireGuard would be merged to the kernel in 2018. In comparison to OpenVPN and IPSec, Torvalds has called WireGuard "a work of art" [2]. If you have followed Torvalds' statements over the years, you know that he is generally very sparing with praise.

WireGuard gets by with only about 4,000 lines of source code. In comparison, OpenVPN together with the required OpenSSL weigh in at around 600,000 lines of code, while IPsec and StrongSwan use more than 400,000 lines. WireGuard offers far less attack potential than its competitors. The software also relies on modern algorithms: ChaCha20 [3] is used for encryption, while Curve25519 handles the key exchange [4].

Fast and Frugal

WireGuard shows its advantages over the established solutions in terms of speed and resource consumption. This manifests itself in far faster and more stable connections, especially when roaming. While OpenVPN often consumes 30 percent of battery power on Android, WireGuard keeps this in the lower single-digit range.

We tested WireGuard with Ubuntu 20.04 LTS, which comes with the backported module for WireGuard in kernel 5.4. Ubuntu users were already interested in WireGuard before its inclusion in the kernel, as evidenced by over 20,000 installations from the WireGuard PPA. There is also a backport for Debian 10 Buster.

Not Just for Linux

WireGuard can also be used with OpenBSD, FreeBSD, NetBSD, macOS, and Microsoft Windows (a stable version is imminent for Windows). For road warriors, there are apps for Android and iOS. You will want to use the original apps rather than third-party apps [5].

You can use WireGuard with modest hardware resources. In terms of the server, you don't need anything faster than an older laptop, a single board computer like the Raspberry Pi, or a rented V-Server on the web. In our test, we used a ThinkPad X220, a device that has been out of service for quite some time (see the box "DynDNS and Port Forwarding"). WireGuard supports constellations with two clients or with one server and multiple clients.

DynDNS and Port Forwarding

A local VPN network on your own LAN only makes sense in very rare cases. The typical application scenario involves dialing into the company network or your home LAN from somewhere outside. In this scenario, you need a DynDNS address, provided by something like the free DynDNS Service [6]. You also need to forward the port used by WireGuard (in our example port 51820/UDP) from the WLAN router to the computer used as a server. Details of the required configuration are usually provided in your device's operating manual. In the case of a FRITZ!Box, call the device's administration interface by typing the FRITZ!Box URL in your browser and then open the wizard in Internet | Shares | Port Shares by clicking on Add Device for Shares, which helps you set up port forwarding.

Buy this article as PDF

Express-Checkout as PDF
Price $2.95
(incl. VAT)

Buy Linux Magazine

SINGLE ISSUES
 
SUBSCRIPTIONS
 
TABLET & SMARTPHONE APPS
Get it on Google Play

US / Canada

Get it on Google Play

UK / Australia

Related content

  • Mistborn

    Mistborn bundles important Internet services on your home network and secures them with a WireGuard VPN tunnel, Pi-hole, iptables rules, and separate containers.

  • Teaming NICs

    Combining your network adapters can speed up network performance – but a little more testing could lead to better choices.

  • Tipi

    Tipi gives you complete control of more than 100 applications and services. A mouse click is all it takes to install the apps.

  • Core Technologies

    Prise the back off Linux and find out what really makes it tick.

  • NEWS

    In the news: Linux Usage Is on the Rise; Lenovo Is Jumping on the Linux Laptop Bandwagon; A New Linux Laptop Is in the Making; Ubuntu 20.04 Released; and Git 2.26 Released.

comments powered by Disqus