Minimally invasive beekeeping with a Raspberry Pi
Illustrated
Grafana [7] visualizes the acquired data. The software supports numerous data sources, including InfluxDB databases. Because the official Raspbian repositories contain a relatively old Grafana version, we used a current package from GitHub [8].
The Grafana service also needs to be configured to launch automatically after boot with systemctl enable
; the
systemctl start grafana-server
command calls the service, which users can reach from web interface port 3000 (username and password are admin). First, we used Add data source to add the telegraf
database; then, we set up the dashboard to visualize the metrics (Figure 1).
We moved the RPi2B, at first provisionally protected with plastic bags and tape, into the beehive, which is located next to the house wall and can therefore use the existing wireless network (Figure 2).
To make room for the RPi2B and sensor, we took one slat out of the top floor of the two-frame hive. The DHT11 currently measures the temperature at the upper edge of the lower frame. At an outside temperature of 1°C (ca. 34°F), the average Easter weekend temperature was 8°C.
Close to the Bees
The temperatures are higher where the queen lives and where the bees breed (about 35°C, or 95°F). Other beekeepers have three or four sensors in the hives and measure the temperature at the entrance hole, under the lid, and in the lowest frame. You can check out the sensor results of the Hiveeyes project online [9].
With the information from a SunFounder tutorial [10], we experimented with a DS18B20 temperature sensor and a speaker module. To communicate through the GPIO extension board, we installed the Wiring Pi library [11], which provides the gpio
tool (Figure 3).
The idea was to create a measuring device that emits an audible signal when a certain temperature is exceeded. Such a device could be interesting for transporting colonies of bees. If longer distances are planned, a transport grid on top of the hive ensures a sufficient air supply. For shorter distances, however, many beekeepers simply secure the hive with a strap.
When it gets too warm, the bees start flapping their wings to cool down, and when the hive is closed, everything heats up even more – the insects can produce such high temperatures that the combs and honey melt and the bees perish. A signal tone warns the beekeeper during transport and prevents the colonies from buzzing themselves to death while cooling the beehive.
Do Not Miscalculate!
A hive scale is planned for the summer to monitor the weight of the beehives. The beekeepers association in Nettetal, Germany, implemented such a project with an Arduino [12]; the data is presented by the Hiveeyes project. A scale is not only interesting in the summer to observe honey production, it can also be used in winter to better assess whether sufficient food is available. If it remains very cold for a long time, the bees will need more food – you can then see in time whether or not nutrition is becoming scarce.
Infos
- The Hiveeyes Project: https://www.hiveeyes.org
- Open Hive: http://open-hive.org
- Python_DHT sensor library: https://github.com/coding-world/Python_DHT (README in German)
- InfluxDB and Telegraf repository: https://repos.influxdata.com/debian
- InfluxDB: https://www.influxdata.com/time-series-platform/influxdb
- Telegraf: https://www.influxdata.com/time-series-platform/telegraf
- Grafana: https://grafana.com
- Grafana on GitHub: https://github.com/grafana/grafana
- Hiveeyes dashboards: https://swarm.hiveeyes.org/grafana/dashboards
- SunFounder tutorials: https://www.sunfounder.com/learn
- Wiring Pi: http://wiringpi.com
- Arduino bee scale: https://www.imker-nettetal.de/esp8266-beescale-erste-eindruecke (in German)
« Previous 1 2
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
Canonical Releases Ubuntu 24.04
After a brief pause because of the XZ vulnerability, Ubuntu 24.04 is now available for install.
-
Linux Servers Targeted by Akira Ransomware
A group of bad actors who have already extorted $42 million have their sights set on the Linux platform.
-
TUXEDO Computers Unveils Linux Laptop Featuring AMD Ryzen CPU
This latest release is the first laptop to include the new CPU from Ryzen and Linux preinstalled.
-
XZ Gets the All-Clear
The back door xz vulnerability has been officially reverted for Fedora 40 and versions 38 and 39 were never affected.
-
Canonical Collaborates with Qualcomm on New Venture
This new joint effort is geared toward bringing Ubuntu and Ubuntu Core to Qualcomm-powered devices.
-
Kodi 21.0 Open-Source Entertainment Hub Released
After a year of development, the award-winning Kodi cross-platform, media center software is now available with many new additions and improvements.
-
Linux Usage Increases in Two Key Areas
If market share is your thing, you'll be happy to know that Linux is on the rise in two areas that, if they keep climbing, could have serious meaning for Linux's future.
-
Vulnerability Discovered in xz Libraries
An urgent alert for Fedora 40 has been posted and users should pay attention.
-
Canonical Bumps LTS Support to 12 years
If you're worried that your Ubuntu LTS release won't be supported long enough to last, Canonical has a surprise for you in the form of 12 years of security coverage.
-
Fedora 40 Beta Released Soon
With the official release of Fedora 40 coming in April, it's almost time to download the beta and see what's new.