3D Designer
Modules
At some point, things are going to get complex. You are going to have objects twisted around other objects, modifying other objects that are used in combination with yet more objects.
It helps then that openSCAD supports modules to organize stuff. Modules are simply a bunch of instructions that go together.
To illustrate how they work, let's make a funnel as shown in Figure 7.
A funnel is made up by two parts: a hollow, cut-off conical object that I am going to call the hat (I couldn't find formal names for the parts of a funnel, so I am improvising here), and a hollow cylinder I am calling the pipe.
Turns out both the hat and the pipe can be made entirely from cylinders, since the hat, for openSCAD, is a cylinder with two different diameters at each end. As you need it to be hollow, you make another cylinder with a slightly smaller radius at both ends and subtract that from the bigger one. The module for that would look like Listing 3.
Listing 3
Hat Module
module hat () { difference () { cylinder (r1=8, r2=2, h=10, center=true, $fn=50); cylinder (r1=7.5, r2=1.5, h=10, center=true, $fn=50); } }
The pipe module is even simpler (Listing 4), but you do have to remember to translate the lower end of the pipe to the top of the hat (line 2).
Listing 4
Pipe Module
01 module pipe () { 02 translate ([0,0,10]) { 03 difference () { 04 cylinder (r=2, h=10, center=true, $fn=50); 05 cylinder (r=1.5, h=10, center=true, $fn=50); 06 } 07 } 08 }
With these two modules, you can create a funnel ()
module that calls the other two (Listing 5, lines 17 to 20). Then call the funnel ()
module to actually show something in the preview pane (Listing 5, line 22).
Listing 5
funnel.scad
01 module hat () { 02 difference () { 03 cylinder (r1=8, r2=2, h=10, center=true, $fn=50); 04 cylinder (r1=7.5, r2=1.5, h=10, center=true, $fn=50); 05 } 06 } 07 08 module pipe () { 09 translate ([0,0,10]) { 10 difference () { 11 cylinder (r=2, h=10, center=true, $fn=50); 12 cylinder (r=1.5, h=10, center=true, $fn=50); 13 } 14 } 15 } 16 17 module funnel () { 18 hat (); 19 pipe (); 20 } 21 22 funnel ();
You can take this modularity further and save a set of modules into a separate .scad file altogether. You can then import them back into other files using either the include
or the use
methods.
The include </path/to/file.scad>
method imports the whole thing, modules and commands that are not in modules, integrating the whole imported file into your current file. The use </path/to/file.scad>
method, on the other hand, only imports the modules so you can use them as library modules with the code in your current file.
This means that, to get a funnel with include
, all you have to do is:
include <funnel.scad>;
To do the same with use
, you would also have to call the funnel ()
method like this:
use <funnel.scad>; funnel ();
Conclusion
This article has covered the most essential bits and pieces of the OpenSCAD language. With this and the user manual's excellent documentation [5], you should be able to start creating your first 3D pieces.
That said, there is quite a lot more to learn regarding OpenSCAD. We'll be looking at more advanced things in next month's issue. We will also be creating a real piece to print and showing how you can go all the way from concept to real physical object.
Until then, have fun!
Infos
- Thingiverse: https://www.thingiverse.com/
- Atelier: https://atelier.kde.org/
- OpenSCAD: http://www.openscad.org
- FreeCAD: https://www.freecadweb.org/
- OpenSCAD User Manual: https://en.wikibooks.org/wiki/OpenSCAD_User_Manual
« Previous 1 2 3
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
Gnome OS Transitioning Toward a General-Purpose Distro
If you're looking for the perfectly vanilla take on the Gnome desktop, Gnome OS might be for you.
-
Fedora 41 Released with New Features
If you're a Fedora fan or just looking for a Linux distribution to help you migrate from Windows, Fedora 41 might be just the ticket.
-
AlmaLinux OS Kitten 10 Gives Power Users a Sneak Preview
If you're looking to kick the tires of AlmaLinux's upstream version, the developers have a purrfect solution.
-
Gnome 47.1 Released with a Few Fixes
The latest release of the Gnome desktop is all about fixing a few nagging issues and not about bringing new features into the mix.
-
System76 Unveils an Ampere-Powered Thelio Desktop
If you're looking for a new desktop system for developing autonomous driving and software-defined vehicle solutions. System76 has you covered.
-
VirtualBox 7.1.4 Includes Initial Support for Linux kernel 6.12
The latest version of VirtualBox has arrived and it not only adds initial support for kernel 6.12 but another feature that will make using the virtual machine tool much easier.
-
New Slimbook EVO with Raw AMD Ryzen Power
If you're looking for serious power in a 14" ultrabook that is powered by Linux, Slimbook has just the thing for you.
-
The Gnome Foundation Struggling to Stay Afloat
The foundation behind the Gnome desktop environment is having to go through some serious belt-tightening due to continued financial problems.
-
Thousands of Linux Servers Infected with Stealth Malware Since 2021
Perfctl is capable of remaining undetected, which makes it dangerous and hard to mitigate.
-
Halcyon Creates Anti-Ransomware Protection for Linux
As more Linux systems are targeted by ransomware, Halcyon is stepping up its protection.