Control USB-powered devices with a Raspberry Pi
Power Point
![© Lead Image © Burmakin Andrey, 123RF.com © Lead Image © Burmakin Andrey, 123RF.com](/var/linux_magazin/storage/images/issues/2021/250/pi-control-of-usb-devices/burmakin_andrey_123rf.png/791164-1-eng-US/Burmakin_Andrey_123rf.png_medium.png)
© Lead Image © Burmakin Andrey, 123RF.com
Command-line tools and Node-RED on a Raspberry Pi let you control projects that use the USB ports.
For home automation projects, a Raspberry Pi offers a simple, low-cost approach to managing and controlling a wide variety of devices. Typically these devices are either digitally wired 0-5V devices such as motion detectors, or wireless Ethernet devices such as smart plugs. It's important to note that a Raspberry Pi can also control USB-powered devices, such as USB fans, lights, and low-end controllers.
In this article, I look at how to monitor, control, and measure USB power in two Raspberry Pi projects. The first project uses Node-RED to create a web dashboard to monitor and control USB lights. The second project turns on USB cooling fans according to the Pi's CPU temperature.
Controlling USB Ports
A number of techniques allow you to control USB ports, and I found that one of easiest approaches is to use the uhubctl
[1] utility, which lets you view and control local USB ports and ports on smart USB hubs. To load this utility, enter:
sudo apt-get install libusb-1.0-0-dev git clone https://github.com/mvp/uhubctl cd uhubctl make sudo make install
Figure 1 shows the output on a Raspberry Pi 4 with no USB devices connected. The Pi 4 has two internal USB hubs: Hub 1 connects to all the USB ports with the USB 2.10 standard, and hub 2 controls all the ports with the USB 3.00 standard and the Ethernet jack.
![](/var/linux_magazin/storage/images/issues/2021/250/pi-control-of-usb-devices/figure-1/791167-1-eng-US/Figure-1_large.png)
For the Raspberry Pi 3 and 4, the power on all USB ports is ganged together through port 2, so unfortunately it is not possible to power up and down an individual USB port.
The commands to turn on or off or toggle the USB ports and keep the Ethernet jack powered are:
sudo uhubctl -l 1-1 -p 2 -a on sudo uhubctl -l 1-1 -p 2 -a off sudo uhubctl -l 1-1 -p 2 -a toggle
These commands return messages showing the current status, the power requested state, and the new status.
Monitoring USB Power
The uhubctl
command lets you check the status of Pi port 2, the ganged power port (Figure 2). With some Bash statements, the power status is parsed to show just the off or power message. The Bash statement
$ sudo uhubctl | grep 'Port 2' | awk '{print $4}' off
![](/var/linux_magazin/storage/images/issues/2021/250/pi-control-of-usb-devices/figure-2/791170-1-eng-US/Figure-2_large.png)
shows the power status on a Node-RED dashboard.
Node-RED USB Control Dashboard
Node-RED [2] is a visual programming tool included with the full desktop Raspberry Pi install. If Node-RED has not been installed, see the online docs [3].
A number of low-cost USB lighting options can be used with a Raspberry Pi (Figure 3), including LED strips, wire lights, and small USB lamps. Node-RED doesn't have a node to monitor or control USB power, but Bash commands can be used directly in Node-RED.
![](/var/linux_magazin/storage/images/issues/2021/250/pi-control-of-usb-devices/figure-3/791173-1-eng-US/Figure-3_large.png)
A simple Node-RED dashboard can be created to turn Raspberry Pi USB ports on and off and check the status of power on these ports. The logic (Figure 4) would include two dashboard button nodes, one dashboard text node, and two exec nodes. The uhubctl
utility can be used directly in the exec nodes.
![](/var/linux_magazin/storage/images/issues/2021/250/pi-control-of-usb-devices/figure-4/791176-1-eng-US/Figure-4_large.png)
The first exec node contains the Bash command to turn the USB ports on or off (Figure 5). The on or off string is sent from the dashboard buttons as a msg.payload
message that is appended to the command in the exec node. The output from the first exec node triggers the second exec node to get the latest USB port status.
![](/var/linux_magazin/storage/images/issues/2021/250/pi-control-of-usb-devices/figure-5/791179-1-eng-US/Figure-5_large.png)
The USB power status message can be made more presentable by editing the Value format field in the dashboard text node. For this example, I used an <h1>
heading and uppercase
formatting (Figure 6).
![](/var/linux_magazin/storage/images/issues/2021/250/pi-control-of-usb-devices/figure-6/791182-1-eng-US/Figure-6_large.png)
Once the logic is complete, the Deploy button on the right side of the menubar will make the dashboard available to web clients at: https://raspberry_pi_address:1880/ui. For this project, I added an enhancement to include a countdown or sleep timer (Figure 7).
![](/var/linux_magazin/storage/images/issues/2021/250/pi-control-of-usb-devices/figure-7/791185-1-eng-US/Figure-7_large.png)
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
![Learn More](https://www.linux-magazine.com/var/linux_magazin/storage/images/media/linux-magazine-eng-us/images/misc/learn-more/834592-1-eng-US/Learn-More_medium.png)
News
-
NVIDIA Released Driver for Upcoming NVIDIA 560 GPU for Linux
Not only has NVIDIA released the driver for its upcoming CPU series, it's the first release that defaults to using open-source GPU kernel modules.
-
OpenMandriva Lx 24.07 Released
If you’re into rolling release Linux distributions, OpenMandriva ROME has a new snapshot with a new kernel.
-
Kernel 6.10 Available for General Usage
Linus Torvalds has released the 6.10 kernel and it includes significant performance increases for Intel Core hybrid systems and more.
-
TUXEDO Computers Releases InfinityBook Pro 14 Gen9 Laptop
Sporting either AMD or Intel CPUs, the TUXEDO InfinityBook Pro 14 is an extremely compact, lightweight, sturdy powerhouse.
-
Google Extends Support for Linux Kernels Used for Android
Because the LTS Linux kernel releases are so important to Android, Google has decided to extend the support period beyond that offered by the kernel development team.
-
Linux Mint 22 Stable Delayed
If you're anxious about getting your hands on the stable release of Linux Mint 22, it looks as if you're going to have to wait a bit longer.
-
Nitrux 3.5.1 Available for Install
The latest version of the immutable, systemd-free distribution includes an updated kernel and NVIDIA driver.
-
Debian 12.6 Released with Plenty of Bug Fixes and Updates
The sixth update to Debian "Bookworm" is all about security mitigations and making adjustments for some "serious problems."
-
Canonical Offers 12-Year LTS for Open Source Docker Images
Canonical is expanding its LTS offering to reach beyond the DEB packages with a new distro-less Docker image.
-
Plasma Desktop 6.1 Released with Several Enhancements
If you're a fan of Plasma Desktop, you should be excited about this new point release.