DIY Mobile Photo Sharing with Piwigo and ReGalAndroid
Productivity Sauce
If you happen to host your own photo gallery using Piwigo or Gallery and you use an Android device, you have almost everything you need to replace TwitPic, yfrog, or any other third-party mobile photo sharing service with your own DIY solution. Using the ReGalAndroid app, you can not only browse photos in your photo gallery, but also snap pictures, upload them to the gallery, and share them via microblogging services like Identi.ca or Twitter.
To connect ReGalAndroid to your photo gallery installation, launch the app, press the Menu hardware button on your Android device, tap on Settings, and configure the required settings, such as Gallery type, Gallery URL, Username, and Password. While you can upload photos from ReGalAndroid to an existing album in your gallery, you might want to create a separate album for your mobile snaps. You can do this either in the gallery itself, or directly from ReGalAndroid using the Menu | Create a new subalbum button.
Uploading snaps from the Android device to the gallery is easy. Use the Menu | Take picture and send it to gallery button to launch the built-in camera app, take a snap, and push it to the gallery. Alternatively, you can upload an existing photo stored on your Android device using the Menu | Add a photo in this album button. Finally, to share the uploaded photo via Identi.ca or Twitter, open the photo in full-view mode in ReGalAndroid, press the Menu | Share this photo url button, and pick your preferred microblogging app from the list of sharing actions.
comments powered by DisqusSubscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
FreeBSD Promises a Full Desktop Installer
FreeBSD has lacked an option to include a full desktop environment during installation.
-
Linux Hits an Important Milestone
If you pay attention to the news in the Linux-sphere, you've probably heard that the open source operating system recently crashed through a ceiling no one thought possible.
-
Plasma Bigscreen Returns
A developer discovered that the Plasma Bigscreen feature had been sitting untouched, so he decided to do something about it.
-
CachyOS Now Lets Users Choose Their Shell
Imagine getting the opportunity to select which shell you want during the installation of your favorite Linux distribution. That's now a thing.
-
Wayland 1.24 Released with Fixes and New Features
Wayland continues to move forward, while X11 slowly vanishes into the shadows, and the latest release includes plenty of improvements.
-
Bugs Found in sudo
Two critical flaws allow users to gain access to root privileges.
-
Fedora Continues 32-Bit Support
In a move that should come as a relief to some portions of the Linux community, Fedora will continue supporting 32-bit architecture.
-
Linux Kernel 6.17 Drops bcachefs
After a clash over some late fixes and disagreements between bcachefs's lead developer and Linus Torvalds, bachefs is out.
-
ONLYOFFICE v9 Embraces AI
Like nearly all office suites on the market (except LibreOffice), ONLYOFFICE has decided to go the AI route.
-
Two Local Privilege Escalation Flaws Discovered in Linux
Qualys researchers have discovered two local privilege escalation vulnerabilities that allow hackers to gain root privileges on major Linux distributions.