Secure name resolution with DNS-over-TLS
Testing the Implementation
Without validation, configuration changes are just optimistic adjustments. By testing, you ensure that your system uses the specified DNS servers and also that the DNS queries are encrypted, guaranteeing the privacy and security boost DoT promises.
To check the active DNS server, enter
resolvectl status | grep 'Current DNS Server'
If the output matches the specified servers (e.g., 1.1.1.1
), it's a preliminary indication things are on track.
Monitoring DNS Traffic for Encryption
DoT is a fundamental security feature for modern networks, but like all systems, DoT requires vigilance. One cannot simply enable and forget; it must be actively monitored.
Before you can monitor traffic on your interface, you need to determine its name using the ip a
or ip addr show
command:
ip a
This command provides a list of all network interfaces. Typically, wired connections are represented as ethX
(e.g., eth0
), while wireless connections are often labeled as wlanX
(e.g., wlan0
).
Look for the interface that has an Inet address (IPv4) or Inet6 address (IPv6) associated with it and is UP
. This is typically the active network interface. For instance, the output might look like Listing 1.
Listing 1
Output Showing All Network Interfaces
01 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 02 inet 192.168.1.10/24 brd 192.168.1.255 scope global dynamic eth0
In Listing 1, eth0
is the active network interface.
Monitoring with tcpdump
Now that you've identified your active network interface, utilize tcpdump
to monitor DNS traffic. With DoT, monitoring becomes critical to ensure encryption is active. To monitor your DNS traffic, use
sudo tcpdump -i eth0 -n 'port 853'
Replace eth0
with your identified interface.
With the above command, tcpdump
intercepts and logs network traffic. If DoT is functional, the domain names accessed won't appear in plaintext. DoT operates via port 853, with encrypted queries passing through it.
While tcpdump
is active, access a few websites. Instead of recognizable domain names, you'll largely see encrypted data, verifying the effectiveness of your DoT setup.
The importance of regular traffic monitoring can't be overstated. Monitoring helps identify unusual traffic patterns and potential security breaches, while also ensuring that DoT operates without hitches. Of course, tools like DoT are only part of the solution for maintaining a secure environment. You're still only as safe as your system is, which means you can never escape the need for regular audits and system updates (see the box entitled "Keeping the System Up to Date").
Keeping the System Up to Date
Every system, regardless of its purpose, is a potential target. As such, keeping systems updated is not a luxury, but a necessity.
On Apt-based Linux systems, system and package updates are as easy as
sudo apt update && sudo apt upgrade
Regular updates patch vulnerabilities and ensure optimal performance. This not only keeps the DoT setup solid but the entire system secure.
Periodic security audits are also important. Tools like Nmap or Wireshark will help you monitor and review network traffic. Be sure only necessary ports are open and accessible, and regularly review and update configurations, ensuring that no deprecated protocols or software are in use.
« Previous 1 2 3 Next »
Buy this article as PDF
(incl. VAT)