Managing Active Directory from Linux with adtool
To explain the process in greater detail, I'll take a closer look at the steps described in the preceding section. First, to create a digital certificate (with OpenSSL in this case), you can start by creating a certificate signing request:
$ openssl req -days 3650 -nodes -new \ -keyout /usr/local/etc/ openldap/private/myldapserver.key \ -out /usr/local/etc/openldap/private/myldapserver.csr
The preceding line tells OpenSSL to create a certificate request for my server, which, for the purposes of this example, is called
You will be asked certain questions. Be careful that you provide the correct server name when asked for the CN (Canonical Name) entry. If you provide the wrong name, your domain controller or your LDAP server will reject all SSL-based connections. You will then need to re-create the certificate.
Next, you need to need to sign the request:
openssl x509 -req -days 3650 \ -in /usr/local/etc/openldap/private/myldapserver.csr \ -out /usr/local/etc/openldap/myldapserver.crt \ -CA /usr/local/etc/openldap/ca.crt \ -CAkey /usr/local/etc/openldap/private/ca.key \ -CAcreateserial
You now have a working certificate. You then need to copy it to the appropriate directory, so that your LDAP server can use it. For example, on my system, I would copy it to the
/usr/local/etc/openldap directory as follows:
/usr/local/etc/openldap/myldapserver.crt /usr/local/etc/openldap/private/myldapserver.key /usr/local/etc/openldap/ca.crt
Then, you can edit the
/etc/ldap/ldap.conf file so it contains the appropriate values. If, for example, I had a server named
myldapserver for stanger.com, I would edit the file accordingly (see Listing 1).
Adding an LDAP Server
01 BASE dc=stanger,dc=com 02 URI ldap://myldapserver.stanger.com 03 04 SIZELIMIT 12 05 TIMELIMIT 15 06 #DEREF never 07 08 ssl start_tls 09 TLS_CACERT /usr/local/etc/openldap/ca.crt 10 TLS_CIPHER_SUITE HIGH:MEDIUM:+SSLv3 11 12 BASE dc=YOUR,dc=DOMAIN,dc=HERE 13 URI ldaps://stanger.com 14 TLS_REQCERT allow
The last three lines in Listing 1 helped make sure that my Linux LDAP implementation used SSL when communicating with the domain controller. You might need to change the directory names, depending upon your Linux implementation. Once you have made these changes, you can restart your LDAP server.
Once LDAP is using SSL, you need to edit the adtool configuration file, which is usually at the following location:
/etc/adtool.cfg. If you wish, you can also create a local file, such as
~/.adtool.cfg. Some admins think that creating these values in a user-level file is more convenient. It can also be more secure, because now connection-specific details are found in a user's directory, rather than in the system-wide
/etc/adtool.cfg file. It's your choice. For my example, I'm going to use the
To set the file so that it uses my SSL-enabled LDAP server (
myldapserver), my domain name (stanger.com), and my password (
linuxpromagazinerules), I would edit the file accordingly:
uri ldaps://myldapserver.stanger.com binddn cn=Administrator,cn=Users,dc=domain,dc=tld bindpw $ linuxpromagazinerules searchbase dc=domain,dc=tld
Once I have made these changes, I can connect to a Microsoft Active Directory domain controller over an SSL-encrypted connection, and all the adtool features will be available.
Using adtool for Common Tasks
Now that I've got a fully-functional implementation of adtool, it is time to explore some of the typical adtool features for managing an Active Directory environment.
To list users in an organizational unit, issue the following command:
$ adtool list ou=user,dc=stanger,dc=com CN=allusers,OU=user,DC=stanger,DC=com OU=research,OU=user,DC=stanger,DC=com OU=accounting,OU=user,DC=stanger,DC=com
The result will be that you will see all users that you have specified in the request.
To create a new user, you can issue the following command:
$ adtool useradd jstanger ou=research,ou=user,dc=stanger,dc=com
You will, of course, need to set a password for this user. To set a password, issue the following command:
$ adtool setpass jstanger linuxpromagazinerules
Many times, a domain controller will be set to lock a new user's account by default. You will therefore need to unlock this user's account. To unlock an account, the command is fairly simple:
$ adtool unlock jstanger
You might also need to unlock existing user accounts, either because the user has exceeded the number of logins, or because the user's login account has become disabled because of time limits.
Suppose this new user needs to be placed into a new group named
phpdevelopers. First, you would create a group named
phpdevelopers by issuing the following command:
$ adtool groupcreate phpdevelopers ou=user,cd=stangernet,dc=com
To add the user named
jstanger to this new group (
phpdevelopers), issue the following command:
$ adtool groupadd phpdevelopers jstanger
Now you know how to list groups, as well as how to create a user and add a group.
Many times, you will need to create a new organizational unit. To create an OU named
socialmediaexperts, you can do:
$ adtool oucreate socialmediaexperts ou=user,dc=myldapserver.stangernet.com,dc=com
To add a user to all groups:
$ adtool groupadd allusers jstanger
To add details about a user:
$ adtool attributereplace jstanger telephonenumber 4138 $ adtool attributereplace jstanger mail email@example.com
If you wish to add an email address for this user, issue the following command:
$ adtool attributereplace jstanger mail firstname.lastname@example.org
To lock a user's account, issue the following command:
$ adtool userlock jstanger
You can delete a user as follows:
$ adtool userdelete jstanger
Buy this article as PDF
Xen project announces a privilege escalation problem for Qemu host systems
Attackers can compromise an Android phone just by sending a text message
PC vendor will pre-install Ubuntu on portables in India.
More embarrassment for Adobe's embattled multimedia tool
Mozilla’s script blocker add-on could be putting malware sites on the whitelist.
The Internet community officially banishes the notoriously unsafe Secure Sockets Layer protocol.
Popular desktop environment continues the Gnome 2 legacy – with new support for the Gnome 3 toolkit.
New program will dial up security for the Firefox browser.
Red Hat's community distro embraces the cloud.