Network access control on wired networks with IEEE 802.1X
Monitoring
In production use, you can monitor these activities by entering tail -f /var/log/radius/radius.log:
Info: Ready to process requests. Auth: Login OK: [uebelacker] (from client uebelhackers port 13 cli 00:19:e0:18:38:5c)
This output indicates that the owner of the certificate issued to uebelacker has logged in to switch port 13. Both Xsupplicant from the OpenSEA Alliance's [7] Open1X project [8] and the slightly better known wpa_supplicant [9] support this type of supplicant login. However, some distributions do not include these two supplicants. On Ubuntu 9.04, the Network Manager acts as a graphical front end for wpa_supplicant (see Figures 2 and 3).
On the Client
The user needs to configure an 802.1X profile in /etc/xsupplicant/xsupplicant.conf (see Listing 6), which can be tested by calling the supplicant as follows:
xsupplicant -D wired -i eth0 -d 5 -f -c /etc/xsupplicant/xsupplicant.conf
Following 802.1X authentication and the unlocking of the network port, which the tool indicates by announcing Changing from AUTHENTICATING to AUTHENTICATED, the start script assigns either a static IP or uses DHCP in the normal way. If the Xsupplicant is run in the background using /etc/init.d/xsupplicant start, and survives a reboot thanks to chkconfig xsupplicant on, 802.1X authentication will take place automatically.
Listing 6
xsupplicant.conf
Testing
The wpa_supplicant package provides a means for testing the configuration:
wpa_supplicant -i eth0 -D wired -c /etc/wpa_supplicant/wired.conf
Now you need to create a wired.conf configuration file, as specified in Listing 7. Because 802.1X authentication is wire based, you can use version 2 of eapol_version and disable the access point scan.
Listing 7
wired.conf
The supplicant announces CTRL-EVENT-EAP-SUCCESS in the case of a successful authentication. To run the client permanently in the background and authenticate the client automatically in case of 802.1X ports, users need to modify /etc/network/interfaces, as shown in Listing 8 for Debian – assuming they use DHCP. Otherwise, change dhcp to static and define a static IP address. /etc/init.d/networking restart enables these settings. If the client achieves authorized state via a non-IEEE 802.1X port, the login attempt will be redundant, but the client will work normally.
Listing 8
Interfaces Enables DHCP
« Previous 1 2 3 4 Next »
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
Linux Servers Targeted by Akira Ransomware
A group of bad actors who have already extorted $42 million have their sights set on the Linux platform.
-
TUXEDO Computers Unveils Linux Laptop Featuring AMD Ryzen CPU
This latest release is the first laptop to include the new CPU from Ryzen and Linux preinstalled.
-
XZ Gets the All-Clear
The back door xz vulnerability has been officially reverted for Fedora 40 and versions 38 and 39 were never affected.
-
Canonical Collaborates with Qualcomm on New Venture
This new joint effort is geared toward bringing Ubuntu and Ubuntu Core to Qualcomm-powered devices.
-
Kodi 21.0 Open-Source Entertainment Hub Released
After a year of development, the award-winning Kodi cross-platform, media center software is now available with many new additions and improvements.
-
Linux Usage Increases in Two Key Areas
If market share is your thing, you'll be happy to know that Linux is on the rise in two areas that, if they keep climbing, could have serious meaning for Linux's future.
-
Vulnerability Discovered in xz Libraries
An urgent alert for Fedora 40 has been posted and users should pay attention.
-
Canonical Bumps LTS Support to 12 years
If you're worried that your Ubuntu LTS release won't be supported long enough to last, Canonical has a surprise for you in the form of 12 years of security coverage.
-
Fedora 40 Beta Released Soon
With the official release of Fedora 40 coming in April, it's almost time to download the beta and see what's new.
-
New Pentesting Distribution to Compete with Kali Linux
SnoopGod is now available for your testing needs