A home-built virtual RAID with ATA over Ethernet
Network RAID
If you have multiple computers that already run 24/7 on your own network, and if they happen to have unused capacity, you might want to serve up these resources to other PCs. If you take this idea a step farther, you end up with something like a RAID system whose storage you can quickly provide from a central location. Because multiple computers are involved, there are some trade-offs in terms of probability of failure, but the choice of an appropriate RAID level takes the bite out of this potential explosiveness.
The following example creates a RAID 5 array for simplicity's sake. In the first step, the admin creates a raw image on each of three systems (Figures 1 and 2). The RAID array is easily generated with the mdadm
command (Listing 1). On the newly created RAID array, you can then create, for example, an ext4 filesystem:
mkfs.ext4 -L nwraid /dev/md0
Listing 1
mdadm: RAID Array
# mdadm --create /dev/md0 --auto md --level=5 --raid-devices=3 /dev/etherd/e1.1 /dev/etherd/e2.1 /dev/etherd/e3.1 mdadm: Defaulting to version 1.2 metadata mdadm: array /dev/md0 started.
To revive the RAID array on another system, in case of initiator failure, without any great loss of time, you will want to create a matching mdadm configuration file (mdadm.conf
) and store it in a safe place (Listing 2).
Listing 2
mdadm.conf
If you are game for an adventure, you can use Btrfs instead of mdadm
; after all, it is much simpler to handle than mdadm
, and it offers more options – such as inline compression or snapshots. Listing 3 shows how easy it is to set up a RAID array with Btrfs.
Listing 3
Btrfs: RAID Array
# mkfs.btrfs -d raid5 -m raid5 -L nwraid /dev/etherd/e1.1 /dev/etherd/e2.1 /dev/etherd/e3.1 WARNING! - Btrfs v0.20-rc1 IS EXPERIMENTAL WARNING! - see http://btrfs.wiki.kernel.org before using adding device /dev/etherd/e2.1 id 2 adding device /dev/etherd/e3.1 id 3 Setting RAID5/6 feature flag fs created label nwraid on /dev/etherd/e1.1 nodesize 4096 leafsize 4096 sectorsize 4096 size 29.30GB Btrfs v0.20-rc1
Backup and Virtualization
If you frequently need to create disk backups over the network (as is often the case, e.g., in data forensics), you will really enjoy working with AoE: Providing a data carrier over the network is a much faster process compared with iSCSI.
AoE also is much more convenient compared with a backup using Netcat in conjunction with dd
or ewfacquire
, and forensic scientists will love the fact that the popular backup program Guymager [2] instantly identifies AoE devices (Figure 3).
The joy is clouded a little in that vblade is currently only included with Debian, on the Grml Live CD [3], and in Caine [4] version 5. Users with other distributions need to turn to SourceForge [5]. In response to my inquiries to the major projects, only DEFT Linux [6] responded with a promise to add vblade in the next release.
Virtualizing Seized Systems
AoE is a useful tool for virtualization purposes. In conjunction with xmount [7], admins can quickly serve up a secure image as a virtual disk (Listing 4). Forensic scientists who want to deploy a disk image in Encase format with write support should first convert it to a raw image and then embed the raw file as a data carrier.
Listing 4
xmount
# xmount --in ewf --out dd --cache file.ovl diskimage.e?? /mnt/analysis # vblade 2 3 eth0 /mnt/analysis/diskimage.dd
On a remote computer, the system can be virtualized with qemu-kvm
, for example. In the simplest possible case, you would enter
qemu-kvm -m 1024 -hda /dev/etherd/e2.3
to do deliberately without possible optimizations and not make any changes to the host system for the new environment but output much clearer error messages.
« Previous 1 2 3 Next »
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
Canonical Releases Ubuntu 24.04
After a brief pause because of the XZ vulnerability, Ubuntu 24.04 is now available for install.
-
Linux Servers Targeted by Akira Ransomware
A group of bad actors who have already extorted $42 million have their sights set on the Linux platform.
-
TUXEDO Computers Unveils Linux Laptop Featuring AMD Ryzen CPU
This latest release is the first laptop to include the new CPU from Ryzen and Linux preinstalled.
-
XZ Gets the All-Clear
The back door xz vulnerability has been officially reverted for Fedora 40 and versions 38 and 39 were never affected.
-
Canonical Collaborates with Qualcomm on New Venture
This new joint effort is geared toward bringing Ubuntu and Ubuntu Core to Qualcomm-powered devices.
-
Kodi 21.0 Open-Source Entertainment Hub Released
After a year of development, the award-winning Kodi cross-platform, media center software is now available with many new additions and improvements.
-
Linux Usage Increases in Two Key Areas
If market share is your thing, you'll be happy to know that Linux is on the rise in two areas that, if they keep climbing, could have serious meaning for Linux's future.
-
Vulnerability Discovered in xz Libraries
An urgent alert for Fedora 40 has been posted and users should pay attention.
-
Canonical Bumps LTS Support to 12 years
If you're worried that your Ubuntu LTS release won't be supported long enough to last, Canonical has a surprise for you in the form of 12 years of security coverage.
-
Fedora 40 Beta Released Soon
With the official release of Fedora 40 coming in April, it's almost time to download the beta and see what's new.