Building Frames

Go with lavfi

Generating a GIF in two steps – generating the palette and then applying it – is not elegant. Besides, it leaves behind a PNG file that is useless for anything else.

Thanks to the lavfi virtual device, you can do everything in one go (Listing 2), which has the advantage of making you look like a veritable FFmpeg wizard, without generating any PNG cruft to boot.

Listing 2

One-Step GIF Generation

 

At this stage, it should be clear what is going on, but for the sake of clarity:

  • The clip_gray.mp4 file is the grayscale and scaled-down video you want to convert.
  • The lavfi filter options in quotation marks generate the palette image and pipe it through [out] to the …
  • -filter_complex chain of filters.

Apart from using the palette you created with the lavfi virtual device, you reduce the frame rate to 10 frames per second and push the resulting frames out to clip_gray.gif.

The resulting GIF image is smooth, acceptably lightweight, and created in seconds.

Conclusion

Not surprisingly, FFmpeg is the back end for so many video editing applications: The number of things you can do with it is astounding. Although it is true that some of the command lines you have to generate can be eye-wateringly complex, it is often worth working directly with FFmpeg, because it gives you that extra control on the final result. Apart from lavfi, you can learn more about FFmpeg devices by taking a look at the "More Devices" box.

More Devices

Apart from lavfi, a few other FFmpeg devices are worth investigating, especially if you want a raw, but very reliable way of grabbing streams from your camera or desktop:

(1) video4linux2, or v4l2 [4] for short (you can use either), captures streams from your webcam. To work out what devices you have on which to capture streams, run ls /dev/video*. My laptop has, apart from its built-in webcam, an external webcam with its own microphone, so I see:

> ls /dev/video*
/dev/video0 /dev/video1

If you run ffplay -f v4l2 -i /dev/video1, a window pops up showing the feed from the external webcam.

(2) On a related note, alsa [5] and pulse [6] capture audio. To know which device to capture audio from, if you want to use alsa, enter arecord -l. Again, on my laptop, apart from the built-in microphone, I have the microphone attached to the external webcam and a microphone input on an external USB sound card, so I see:

> arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC3241 Analog [ALC3241 Analog] Subdevices: 1/1
 Subdevice #0: subdevice #0
card 1: Device [USB Sound Device], device 0: USB Audio [USB Audio] Subdevices: 1/1
 Subdevice #0: subdevice #0
card 2: H2300 [HP Webcam HD 2300], device 0: USB Audio [USB Audio] Subdevices: 1/1
 Subdevice #0: subdevice #0

If I want to record from the microphone on the webcam, I can see it is card 2 (HP Webcam HD 2300) connected to device 0. This means ffmpeg -f alsa -i hw:2,0 voice.mp3 records to a file called voice.mp3.

With pulse, things are a bit different. First, you need to find out the name of your devices:

> pactl list sources
Source #2
  State: SUSPENDED
  Name: alsa_input.usb-Hewlett_Packard_HP_Webcam_HD_2300-02.analog-stereo Description: HP Webcam HD 2300 Analog Stereo
  Driver: module-alsa-card.c
  Sample Specification: s16le 2ch 44100Hz
  Channel Map: front-left,front-right
  Owner Module: 7
  Mute: no
  Volume: front-left: 48497 /  74% / -7.85 dB, front-right: 48497 /  74% / -7.85 dB  balance 0.00
  Base Volume: 41350 /  63% / -12.00 dB
  Monitor of Sink: n/a
  Latency: 0 usec, configured 0 usec
  Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY[...]

Once you have located the device from which you want to record, you can then use its name in FFmpeg:

ffmpeg -f pulse -i alsa_input.usb-Hewlett_Packard_HP_Webcam_HD_2300-02.analog-stereo voice.mp3

In this case, it captures from an external webcam microphone and records to voice.mp3.

(3) x11grab [7] is interesting if you want to make screencasts. You can grab the whole screen, just a rectangle, or a rectangle centered around the cursor. For example, the line

ffmpeg -f x11grab -follow_mouse centered -framerate 25 -video_size 640x480 -i :0.0 screncast.mp4

captures a 640x480 region centered around the mouse and records it to screencast.mp4.

You can mix and match all the above devices and apply all sorts of effects to the streams they produce. Altogether, they provide a very complete and complex screencasting solution.

Buy Linux Magazine

SINGLE ISSUES
 
SUBSCRIPTIONS
 
TABLET & SMARTPHONE APPS
Get it on Google Play

US / Canada

Get it on Google Play

UK / Australia

Related content

  • Gobbling Up

    Most video editors supply you with a generic catalog of transitions, usually in the shape of tired wipes and fades. But what if you wanted something a little more special? FFmpeg to the rescue.

  • Tutorials – FFmpeg

    Linux has some excellent graphical video-editing tools, but sometimes working from the command line with FFmpeg is just better.

  • Video Editor Roundup

    In a comparison test, we checked out nine free video editing programs: Cinelerra, Flowblade, Kdenlive, Kino, Lightworks, LiVES, OpenShot, Pitivi, and Shotcut.

  • Motion Detection

    The motion detector software, Motion, monitors the video signal from one or multiple cameras and is able to detect whether a significant part of the picture has changed, record and track movement, or launch arbitrary external commands to trigger other actions.

  • Bitparade: Screencast Tools

    Screenshots provide a static impression of an active program, whereas desktop video sequences show the software hard at work. We’ll introduce you to some of the major tools for creating screencasts.

comments powered by Disqus

Direct Download

Read full article as PDF:

News