The sys admin's daily grind: Mi Flora sensors
Salad Grower
Columnist Charly Kühnast recently attached Mi Flora humidity sensors to his potted plants. At first, they only transmitted junk on Bluetooth, but armed with the right tools and a Rasp Pi, Charly now reaps a rich harvest of data.
A long time ago, I wrote about my little Pomodo Pi project [1] in this magazine. It involved me monitoring my tomato plant's soil humidity and watering the plants when there was a risk of them drying out by automatically opening a solenoid valve when the humidity dropped below a certain value. The Vegetronix sensors I still use for this are high quality and durable, but, unfortunately, they need an extra A/D converter and wiring them involved some tinkering.
Meanwhile, I have bought some humidity Mi Flora plant sensors (Figure 1). Their manufacturer, Xiaomi, envisages sending the data to a smartphone app, but I never bothered installing it; instead I pick up the data directly via Bluetooth.
I run the whole thing on a Raspberry Pi, but of course any Linux PC equipped with Bluetooth hardware will do. Software-wise you need the bluez, python3, and python-pexpect packages, which are quickly installed.
Recording the Weather with Bluetooth
The next step is to scan the environment for Bluetooth transmitters. This can usually be done with the command
sudo hcitool scan
but since the sensor is capable of low-energy transmission, I did the scan by typing:
sudo hcitool lescan
The result was a list of MAC addresses and the short names of nearby devices that can speak Bluetooth Low Energy. Hey presto, one of them was my sensor:
[...] C4:7C:8D:6A:5E:17 Flower care
Now I have the MAC address and want to see if the sensor is sending any data:
sudo gatttool --device=C4:7C:8D:6A:5E:17--char-read -a 0x35
The feedback doesn't need to mean anything to me at first glance:
Characteristic value/descriptor: aa bb cc dd ee ff 99 88 77 66 00 00 0000 00 00 00
The important thing is that there is a response at all, because on GitHub there is a small tool that can interpret the data from the sensor. I cloned it to my current directory, as follows:
git clone https://github.com/open-homeautomation/miflora.git
The package contains a small Python script by the name of demo.py
, which reads and displays different measured values from the sensor. Now let's run it:
python3 /home/pi/miflora/demo.py--backend gatttool pollC4:7C:8D:6A:5E:17
Voila! The output looks good:
Getting data from Mi Flora FW: 3.2.1 Name: Flower care Temperature: 23.0°C Moisture: 40 Light: 193 Conductivity: 247 Battery: 100
The humidity is given as a percentage and the luminous intensity in lux. The Conductivity
is shown in microsiemens – it indirectly says something about the nutrient content of the soil.
That's the full extent of my electronic green thumb (at the moment, Figure 2), and I'm already looking forward to the grand opening of my salad bar.
Infos
- "Pomodo Pi" by Charly Kühnast, Linux Magazine, issue 177, August 2015, http://www.linux-magazine.com/Issues/2015/177/Charly-s-Column-PomodoPi/(language)/eng-US
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
Canonical Bumps LTS Support to 12 years
If you're worried that your Ubuntu LTS release won't be supported long enough to last, Canonical has a surprise for you in the form of 12 years of security coverage.
-
Fedora 40 Beta Released Soon
With the official release of Fedora 40 coming in April, it's almost time to download the beta and see what's new.
-
New Pentesting Distribution to Compete with Kali Linux
SnoopGod is now available for your testing needs
-
Juno Computers Launches Another Linux Laptop
If you're looking for a powerhouse laptop that runs Ubuntu, the Juno Computers Neptune 17 v6 should be on your radar.
-
ZorinOS 17.1 Released, Includes Improved Windows App Support
If you need or desire to run Windows applications on Linux, there's one distribution intent on making that easier for you and its new release further improves that feature.
-
Linux Market Share Surpasses 4% for the First Time
Look out Windows and macOS, Linux is on the rise and has even topped ChromeOS to become the fourth most widely used OS around the globe.
-
KDE’s Plasma 6 Officially Available
KDE’s Plasma 6.0 "Megarelease" has happened, and it's brimming with new features, polish, and performance.
-
Latest Version of Tails Unleashed
Tails 6.0 is based on Debian 12 and includes GNOME 43.
-
KDE Announces New Slimbook V with Plenty of Power and KDE’s Plasma 6
If you're a fan of KDE Plasma, you'll be thrilled to hear they've announced a new Slimbook with an AMD CPU and the latest version of KDE Plasma desktop.
-
Monthly Sponsorship Includes Early Access to elementary OS 8
If you want to get a glimpse of what's in the pipeline for elementary OS 8, just set up a monthly sponsorship to help fund its continued existence.