Cloning multiple computers with Clonezilla SE
Deployment Process
To initiate the deployment process, head back to the machine running the Live DRBL environment. Notice that the terminal you had left open will now show the details of the cloning process (Figure 6). You can now safely close the terminal.

From the desktop, double-click the Clonezilla server icon again. You'll again go through the same process as covered in the initial step to first mount the image directory and then select the configuration to apply to all the computers in the network.
However, in the Clonezilla mode screen, you'll now have to select the restore-disk option since this time around you want to deploy the cloned image.
Clonezilla will scan the mounted file server and show you a list of images in the repository. If there are multiple images, scroll through the list and pick the image you want to restore. Next choose the target hard drive. Needless to say, the existing contents of this target will be wiped.
Clonezilla supports three restoration modes. There's Broadcast and Multicast for cloning multiple machines and Unicast for cloning a single machine. You should select the mode that best suits your network. However, multicast is a safe bet that will work for all types of deployments.
You'll then have to choose from three operating modes. If you select the first client+time-to-wait option, Clonezilla will ask you to specify the number of systems on which you want to deploy the image, as well as the time (in seconds) it should wait for the computers to be powered on. If you haven't powered on all your computers before the expiration of this time, Clonezilla will start deploying the image only on the systems that have been powered on.
I usually choose the clients-to-wait option, since I know the number of computers on which I want to deploy the image. Again, Clonezilla will work its magic and drop you back at the console. Leave it as is and head to the computers where you want to deploy the image.
Deploying the Images
Before you power on the computers, make sure they are configured to boot from the network. After you power on, select the highlighted option from the Clonezilla GRUB menu that begins with Clonezilla: multicast restore … (Figure 7).

The computer will boot and wait until the number of computers you specified in the previous step have all been powered on. Once they are all up, Clonezilla will initiate the process to deploy the image on the machines. When it's done, the machines will be rebooted into the cloned environment.
Conclusion
The process might seem involved if you haven't cloned multiple machines before. However once you get the hang of it, you'll be amazed at Clonezilla SE's power and dexterity. Remember however that Clonezilla uses some very unforgiving tools to do its magic. I suggest first experimenting with it on computers with blank disks. You can even create a virtual lab with a virtual network inside VirtualBox to familiarize yourself with the process of cloning and restoring multiple machines, before you use it on physical hardware.
Infos
- Clonezilla: https://clonezilla.org/
- Clonezilla SE: https://clonezilla.org/clonezilla-SE/
- DRBL manual installation: https://drbl.org/installation/
- DRBL Live CD download: http://drbl.org/download/
« Previous 1 2
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you've found an article to be beneficial.
News
-
The GNU Project Celebrates Its 40th Birthday
September 27 marks the 40th anniversary of the GNU Project, and it was celebrated with a hacker meeting in Biel/Bienne, Switzerland.
-
Linux Kernel Reducing Long-Term Support
LTS support for the Linux kernel is about to undergo some serious changes that will have a considerable impact on the future.
-
Fedora 39 Beta Now Available for Testing
For fans and users of Fedora Linux, the first beta of release 39 is now available, which is a minor upgrade but does include GNOME 45.
-
Fedora Linux 40 to Drop X11 for KDE Plasma
When Fedora 40 arrives in 2024, there will be a few big changes coming, especially for the KDE Plasma option.
-
Real-Time Ubuntu Available in AWS Marketplace
Anyone looking for a Linux distribution for real-time processing could do a whole lot worse than Real-Time Ubuntu.
-
KSMBD Finally Reaches a Stable State
For those who've been looking forward to the first release of KSMBD, after two years it's no longer considered experimental.
-
Nitrux 3.0.0 Has Been Released
The latest version of Nitrux brings plenty of innovation and fresh apps to the table.
-
Linux From Scratch 12.0 Now Available
If you're looking to roll your own Linux distribution, the latest version of Linux From Scratch is now available with plenty of updates.
-
Linux Kernel 6.5 Has Been Released
The newest Linux kernel, version 6.5, now includes initial support for two very exciting features.
-
UbuntuDDE 23.04 Now Available
A new version of the UbuntuDDE remix has finally arrived with all the updates from the Deepin desktop and everything that comes with the Ubuntu 23.04 base.