Control your Rasp Pi projects with Python’s Tkinter library
The Tinkerer
Use Tkinter to control your Rasp Pi projects from a smartphone or tablet.
If you are looking for an easy way to control your Raspberry Pi projects, consider Python's Tkinter library. In about 20 lines of Python code, you can create a graphic program to control a Rasp Pi rover project (Figure 1). This article shows how to create a Python Tkinter application to control the Rasp Pi's General Purpose Input Output (GPIO) pins. I will also show you how to set up a desktop shortcut that you can use to easily launch the application, and I will configure a Virtual Network Computing (VNC) server so that a smartphone, tablet, or PC can control the Rasp Pi remotely.
Python Tkinter Library
Tkinter [1] is bundled with the standard Rasp Pi Python installation. The base Tkinter library contains 17 different widgets that you can use for graphic applications. These widgets can be defined with customizable colors, sizes, text, and commands. There are three geometry managers (Pack, Grid, and Place) that can be used to arrange the widgets. For Rasp Pi hardware projects, I found the Grid geometry manager was a good fit. Listing 1 is a simple test program that presents two buttons in a grid and prints feedback when the buttons are pressed. (Note: Python 2.7 references the library as Tkinter
, whereas Python 3 uses tkinter
, lowercase). Figure 2 shows this test program with some button feedback.
Listing 1
tk_test.py
Tkinter Rasp Pi GPIO Motor Example
The Rasp Pi communicates with external hardware through its GPIO pins. These GPIO pins only support 5V connections, so relays or custom tops are required to connect to higher-powered devices. Very low-powered motors can be directly connected to Rasp Pi GPIO pins; however, it is highly recommended that you use a Rasp Pi motor top or some other protection hardware.
Different Rasp Pi tops will vary on the GPIO pins used for their motor connections. For our hardware setup, GPIO pins 19 and 21 were connected to the left and right motors. The GPIO pins are accessed in Python using the RPi.GPIO library. The RPi.GPIO library is preinstalled in the Raspbian image. Listing 2 shows the full code required to drive two motors. For this example, pins 19 and 21 are set as outputs using the GPIO.setup call. A motor function is created to turn each motor on or off. The Tkinter code was enhanced to make the buttons larger and add color. Also, the Python lambda function was used for passing the motor states. Figure 3 shows the Tkinter GPIO control program.
Listing 2
tk_gpio.py
Rasp Pi Shortcut
To make the project easier to access, you can place a quick launch icon or shortcut on the Rasp Pi desktop (Figure 4). To configure a shortcut, add a file to the user's $HOME/desktop
directory:
nano $HOME/desktop/tk_gpio.desktop
The name, icon, and execution command are defined inside this file (Listing 3).
Listing 3
tk_gpio.desktop
Depending on how you plan to run your program, a shortcut might be enough; however, if you would like to control the project remotely, VNC is a good option.
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
TUXEDO Computers Unveils Linux Laptop Featuring AMD Ryzen CPU
This latest release is the first laptop to include the new CPU from Ryzen and Linux preinstalled.
-
XZ Gets the All-Clear
The back door xz vulnerability has been officially reverted for Fedora 40 and versions 38 and 39 were never affected.
-
Canonical Collaborates with Qualcomm on New Venture
This new joint effort is geared toward bringing Ubuntu and Ubuntu Core to Qualcomm-powered devices.
-
Kodi 21.0 Open-Source Entertainment Hub Released
After a year of development, the award-winning Kodi cross-platform, media center software is now available with many new additions and improvements.
-
Linux Usage Increases in Two Key Areas
If market share is your thing, you'll be happy to know that Linux is on the rise in two areas that, if they keep climbing, could have serious meaning for Linux's future.
-
Vulnerability Discovered in xz Libraries
An urgent alert for Fedora 40 has been posted and users should pay attention.
-
Canonical Bumps LTS Support to 12 years
If you're worried that your Ubuntu LTS release won't be supported long enough to last, Canonical has a surprise for you in the form of 12 years of security coverage.
-
Fedora 40 Beta Released Soon
With the official release of Fedora 40 coming in April, it's almost time to download the beta and see what's new.
-
New Pentesting Distribution to Compete with Kali Linux
SnoopGod is now available for your testing needs
-
Juno Computers Launches Another Linux Laptop
If you're looking for a powerhouse laptop that runs Ubuntu, the Juno Computers Neptune 17 v6 should be on your radar.