Senior citizen-friendly video telephony system with a Raspberry Pi
Picking Up a Phone Call
The receiving side does not need to go through as much trouble because I assume that the children and grandchildren have a PC or smartphone. To receive the call from grandma and grandpa, all they have to do is open the link from the email into a web browser, and the grandparents appear on the screen.
Theory and Practice
During the first field test of the full setup, massive interference in the microphone signal occurred in Jitsi. In a direct test of the microphone and sound card (on the Raspberry Pi and a Windows PC), the errors could not be reproduced, so the hardware is obviously not responsible.
The explanation was too weak a power supply, which was overtaxed by supplying power to the Raspberry Pi, sound card, and webcam. A better power supply quickly provided a remedy; alternatively, the use of a USB hub with its own power supply is also an option.
It turns out that the third generation of the Raspberry Pi is overtaxed by high-definition video telephony. Transferring the picture and sound without interruption proved to be a difficult task. On the one hand, the latency caused a noticeable delay during the call. On the other, the echo and acoustic feedback effects disturbed the sound because I couldn't shield the webcam's microphone against the TV's speakers.
If you don't want to upgrade to a far more powerful Raspberry Pi 4, you can mitigate both issues by reducing the CPU load during the video call – which is why Jitsi is called with the parameters shown in the scripts. The picture and sound quality are not perfect, but good enough.
Sources of Error
In the initial phase with the video telephony system, it quite often happened that my grandparents accidentally switched their Sony TV to standby with the remote control while the Raspberry Pi was still running. After that, setting the HDMI input to inactive did not work as desired because the TV did not know what signal source it had been displaying before the Raspberry Pi. The Raspberry Pi's HDMI input remained the last activated input source, and my grandparents needed help because they did not know how to switch to the TV function on the TV. Disaster: the TV stayed black even after it was switched back on.
The attempt to switch the signal source actively to a TV channel by CEC before shutdown did not succeed. In the worst case, the TV still showed a black screen after switching on, but at least it switched back to a TV channel after starting and shutting down video telephony. Some CEC functions are supposed to control the TV's digital tuner remotely; however, in the setup used here, the call from the Raspberry Pi reported that the command was not recognized.
The Sony's remote control has a button for switching between analog and digital, which can also switch the signal input back to the TV. Fortunately, I could communicate this information by telephone. Happily, my grandparents only make this mistake once in a while and should improve their skills over time. To eliminate this source of error completely, the system would have to be given its own TV set. Smaller devices are available second-hand for just a few dollars.
« Previous 1 2 3 4 Next »
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Direct Download
Read full article as PDF:
Price $2.95
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Find SysAdmin Jobs
News
-
MNT Seeks Financial Backing for New Seven-Inch Linux Laptop
MNT Pocket Reform is a tiny laptop that is modular, upgradable, recyclable, reusable, and ships with Debian Linux.
-
Ubuntu Flatpak Remix Adds Flatpak Support Preinstalled
If you're looking for a version of Ubuntu that includes Flatpak support out of the box, there's one clear option.
-
Gnome 44 Release Candidate Now Available
The Gnome 44 release candidate has officially arrived and adds a few changes into the mix.
-
Flathub Vying to Become the Standard Linux App Store
If the Flathub team has any say in the matter, their product will become the default tool for installing Linux apps in 2023.
-
Debian 12 to Ship with KDE Plasma 5.27
The Debian development team has shifted to the latest version of KDE for their testing branch.
-
Planet Computers Launches ARM-based Linux Desktop PCs
The firm that originally released a line of mobile keyboards has taken a different direction and has developed a new line of out-of-the-box mini Linux desktop computers.
-
Ubuntu No Longer Shipping with Flatpak
In a move that probably won’t come as a shock to many, Ubuntu and all of its official spins will no longer ship with Flatpak installed.
-
openSUSE Leap 15.5 Beta Now Available
The final version of the Leap 15 series of openSUSE is available for beta testing and offers only new software versions.
-
Linux Kernel 6.2 Released with New Hardware Support
Find out what's new in the most recent release from Linus Torvalds and the Linux kernel team.
-
Kubuntu Focus Team Releases New Mini Desktop
The team behind Kubuntu Focus has released a new NX GEN 2 mini desktop PC powered by Linux.