Integrating Google Authenticator with SSH logins
Time Synchronization
TOTP requires that the system time be accurate, so synching the server with a Network Time Protocol (NTP) service is recommended. While not a requirement for TOTP to work, NTP will ensure system time synchronization with an external service. By default, Ubuntu Server 22.04 uses systemd-timesyncd
for system time synchronization, but it does not have an NTP server configured by default. To determine if the NTP service is active, use the following command:
$ timedatectl status
I recommend adding NIST's NTP service as the primary NTP server, and Ubuntu's own NTP service as a fallback. To do this, uncomment the #NTP=
and #FallBackNTP=ntp.ubuntu.com
lines in /etc/systemd/timesyncd.conf
, and change NTP=
to NTP=time.nist.gov
. After these configuration changes have been made, restart the timesyncd
service with:
# restart systemd-timesyncd.service
The system should now synchronize its time with the NIST NTP service.
Configuration
The OpenSSH server must be configured to use PAM. In /etc/ssh/sshd_config
, look for the configuration item UsePAM yes
. On Ubuntu Server, sshd
is configured to use PAM by default. Next, switch the KbdInteractiveAuthentication
option from No
to Yes
.
Once these configuration changes have been added to sshd_config
, you will need to add the Google Authentication module to PAM.
PAM looks for service-specific configuration files within /etc/pam.d/
by default. OpenSSH server has a file located at /etc/pam.d/sshd
. Add this configuration item to the bottom of line:
auth required pam_google_authenticator.so nullok
The temporary nullok
option, used for testing, allows users that have not generated a secret key to still authenticate with SSH using only their password. Once keys have been added to all SSH users, the nullok
option will be removed to enforce MFA.
Finally, reload the SSH server configuration with:
# systemctl reload sshd
Generating a Key
Next, you will need to generate a key for users. If you are logging in with the user account via SSH, you will see Verification code:
after entering the password or authenticating with your SSH key. Just click Enter. Because you added nullok
during PAM configuration, you will still be authenticated. Once logged in, run google-authenticator
to generate a secret key. When you run the command, you will be prompted to choose whether the token is time based; enter y
for yes.
A QR code will be displayed, which you can scan with the Google Authenticator app on your phone. A plaintext key will also be displayed, which should be treated with the security of a password. You should write down and securely store the plaintext key or save it to a password manager. This plaintext key can be used to re-add the TOTP key to Google Authenticator if the existing phone is lost, replaced, or broken. After adding the QR code or key to your Google Authenticator app, you can enter the current code displayed in the app for the next prompt in the shell console to verify it is working (you can use -1
to skip this, but it is not recommended). You will also receive several "scratch codes," which can be used in emergencies if the Google Authenticator device is not available. Next, you'll be given several prompts for security options; choose y
for yes for all of them (see Figure 1) The rate limiting options are especially important because these options will prevent an attacker from attempting a brute-force attack on a time-based password.
« Previous 1 2 3 4 Next »
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
Red Hat Adds New Deployment Option for Enterprise Linux Platforms
Red Hat has re-imagined enterprise Linux for an AI future with Image Mode.
-
OSJH and LPI Release 2024 Open Source Pros Job Survey Results
See what open source professionals look for in a new role.
-
Proton 9.0-1 Released to Improve Gaming with Steam
The latest release of Proton 9 adds several improvements and fixes an issue that has been problematic for Linux users.
-
So Long Neofetch and Thanks for the Info
Today is a day that every Linux user who enjoys bragging about their system(s) will mourn, as Neofetch has come to an end.
-
Ubuntu 24.04 Comes with a “Flaw"
If you're thinking you might want to upgrade from your current Ubuntu release to the latest, there's something you might want to consider before doing so.
-
Canonical Releases Ubuntu 24.04
After a brief pause because of the XZ vulnerability, Ubuntu 24.04 is now available for install.
-
Linux Servers Targeted by Akira Ransomware
A group of bad actors who have already extorted $42 million have their sights set on the Linux platform.
-
TUXEDO Computers Unveils Linux Laptop Featuring AMD Ryzen CPU
This latest release is the first laptop to include the new CPU from Ryzen and Linux preinstalled.
-
XZ Gets the All-Clear
The back door xz vulnerability has been officially reverted for Fedora 40 and versions 38 and 39 were never affected.
-
Canonical Collaborates with Qualcomm on New Venture
This new joint effort is geared toward bringing Ubuntu and Ubuntu Core to Qualcomm-powered devices.