Monitor your old Linux devices
Watching Grampa
Create monitoring dashboards with SSH, command-line tools, and Node-RED.
Some excellent technologies and packages are available for monitoring computer hardware. For medium to large systems, the Simple Network Monitoring Protocol (SNMP) approach is usually the preferred solution. However if you have a smaller system with older or low-end servers, some excellent lightweight command-line monitoring utilities can be used instead.
These command-line utilities can be run remotely over Secure Shell (SSH) and the output parsed to return only the key data values, which can then be displayed graphically in a Node-RED web dashboard (Figure 1). In this article, I demonstrate examples that use the iostat
utility [1] to monitor CPU utilization and the lm-sensors package [2] and hddtemp
utility [3] to monitor temperatures on dashboards.
CPU Utilitization
The iostat
utility is part of the sysstat package and is probably already loaded on your older systems. If not, it can be installed by:
sudo apt-get install sysstat
The iostat
utility generates a report for CPU, device, and filesystem utilization. The output from this command can be parsed with some Bash statement to return just the key value of interest.
Listing 1 shows an example of how to grab the fourth line of output with sed (line 7) and parse the %idle value at the end of the line with awk (line 11) to get the sixth string item (line 12).
Listing 1
Parsing iostat Output
01 pete@lubuntu: ~$ iostat -c 02 Linux 4.15.0-72-generic (lubuntu) 2020-05-02 i686 (4 CPU) 03 avg-cpu: %user %nice %system %iowait %steal %idle 04 8.37 0.03 3.33 1.29 86.97 05 06 # Get 4th line of the iostat output 07 pete@lubuntu : ~$ iostat -c | sed -n 4p 08 8.36 0.03 3.33 1.29 0.00 86.99 09 10 # Now get the 6th string 11 pete@lubuntu : ~$ iostat -c | sed -n 4p | awk '{print $6}' 12 87.02
Chip-Based Temperature
To install the hardware sensors in the lm-sensors package, enter:
sudo apt-get install lm-sensors
After the package is installed, the software needs to detect which sensors are available for monitoring:
sudo sensors-detect
This step presents a number of prompts about which sensors need to be scanned. Once the scan step is complete, the sensors command returns results for all the hardware it found.
Specific sensors can be shown with the command:
sensors <chip name>
Listing 2 shows an example of the sensors
command being used to look at the dell_smm-virtual-0 chipset. The CPU temperature value (in line 5) can be parsed with grep
(line 10), which looks for the line that contains "CPU'; then, awk (line 14) outputs the second item of the string (line 15).
Listing 2
Parsing Sensor Data
01 pete@lubuntu: ~$ sensors dell_smm-virtual-0 02 dell_smm-virtual-0 03 Adapter: Virtual device 04 Processor Fan: 2687 RPM 05 CPU: +40.0°C 06 Ambient: +34.0°C 07 SODIMM: +33.0°C 08 09 # Get the CPU temperature 10 pete@lubuntu: ~$ sensors dell_smm-virtual-0 | grep 'CPU' 11 CPU: +40.0°C 12 13 # Return just the temperature 14 pete@lubuntu: ~$ sensors dell_smm-virtual-0 | grep 'CPU' | awk '{print $2}' 15 +40.0°C
Hard Drive Temperature
The hddtemp hard drive temperature monitoring package is installed with:
sudo apt-get install hddtemp
By default, hddtemp requires superuser rights, so to make the results available to non-superusers use:
sudo chmod u+s /usr/sbin/hddtemp
To see the temperature of a hard drive, enter its device name. For example, to see /dev/sda
, use:
$ hddtemp /dev/sda /dev/sda: WDC WD3200BPVT-75JJ5T0: 34°C
Again, you can use the awk
command to parse the output to get just the temperature. For this example, the temperature is the fourth item of the string, so the command displays that value as shown here:
$ hddtemp /dev/sda | awk '{print $4}' 34°C
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
Fedora KDE Approved as an Official Spin
If you prefer the Plasma desktop environment and the Fedora distribution, you're in luck because there's now an official spin that is listed on the same level as the Fedora Workstation edition.
-
New Steam Client Ups the Ante for Linux
The latest release from Steam has some pretty cool tricks up its sleeve.
-
Gnome OS Transitioning Toward a General-Purpose Distro
If you're looking for the perfectly vanilla take on the Gnome desktop, Gnome OS might be for you.
-
Fedora 41 Released with New Features
If you're a Fedora fan or just looking for a Linux distribution to help you migrate from Windows, Fedora 41 might be just the ticket.
-
AlmaLinux OS Kitten 10 Gives Power Users a Sneak Preview
If you're looking to kick the tires of AlmaLinux's upstream version, the developers have a purrfect solution.
-
Gnome 47.1 Released with a Few Fixes
The latest release of the Gnome desktop is all about fixing a few nagging issues and not about bringing new features into the mix.
-
System76 Unveils an Ampere-Powered Thelio Desktop
If you're looking for a new desktop system for developing autonomous driving and software-defined vehicle solutions. System76 has you covered.
-
VirtualBox 7.1.4 Includes Initial Support for Linux kernel 6.12
The latest version of VirtualBox has arrived and it not only adds initial support for kernel 6.12 but another feature that will make using the virtual machine tool much easier.
-
New Slimbook EVO with Raw AMD Ryzen Power
If you're looking for serious power in a 14" ultrabook that is powered by Linux, Slimbook has just the thing for you.
-
The Gnome Foundation Struggling to Stay Afloat
The foundation behind the Gnome desktop environment is having to go through some serious belt-tightening due to continued financial problems.