PiJuice HAT for battery-powered Pi Zero
Out in Space
The Raspberry Pi Zero is a frugal little computer. But without a power socket, you might be surprised how quickly it can drain a battery. Active power management is the order of the day.
A Raspberry Pi Zero (W) can require upwards of 100mA – depending on what it is doing. This may not sound like much at first, but given a standard industrial LiPo cell rated at 2,200mAh, that computer won't even last a day. This makes it all the more important to use the battery's energy sparingly. HATs (Hardware Attached on Top) by PiJuice, which have been around for some time, have the circuitry to help you do this. In this article, we take a look at the PiJuice Zero [1], a pHAT that is optimized for the Raspberry Pi Zero (Figure 1).
Use Cases
But first, let's take a brief look at potential application scenarios for a power management HAT: A Raspberry Pi that is connected to a power outlet but needs to run continuously requires UPS protection (UPS being an uninterruptible power supply). If worst comes to worst, the back-up battery can step in at lightning speed and bridge the gap until the power grid is available again.
A second use case is in normal battery-based operation, for example when the Pi is running far away from civilization. The HAT must supply the board with a stable voltage, even if the battery voltage gradually drops. Ideally, the HAT also measures the charge status and reports it to the Pi. A monitoring program can then shut down the computer in good time, which in turn protects the battery from deep discharge. In both examples, there is also a requirement for sophisticated charging management. Instead of replacing the battery, in the second case a solar panel typically recharges the battery, while the UPS uses the power grid for this task.
[...]
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
New Steam Client Ups the Ante for Linux
The latest release from Steam has some pretty cool tricks up its sleeve.
-
Gnome OS Transitioning Toward a General-Purpose Distro
If you're looking for the perfectly vanilla take on the Gnome desktop, Gnome OS might be for you.
-
Fedora 41 Released with New Features
If you're a Fedora fan or just looking for a Linux distribution to help you migrate from Windows, Fedora 41 might be just the ticket.
-
AlmaLinux OS Kitten 10 Gives Power Users a Sneak Preview
If you're looking to kick the tires of AlmaLinux's upstream version, the developers have a purrfect solution.
-
Gnome 47.1 Released with a Few Fixes
The latest release of the Gnome desktop is all about fixing a few nagging issues and not about bringing new features into the mix.
-
System76 Unveils an Ampere-Powered Thelio Desktop
If you're looking for a new desktop system for developing autonomous driving and software-defined vehicle solutions. System76 has you covered.
-
VirtualBox 7.1.4 Includes Initial Support for Linux kernel 6.12
The latest version of VirtualBox has arrived and it not only adds initial support for kernel 6.12 but another feature that will make using the virtual machine tool much easier.
-
New Slimbook EVO with Raw AMD Ryzen Power
If you're looking for serious power in a 14" ultrabook that is powered by Linux, Slimbook has just the thing for you.
-
The Gnome Foundation Struggling to Stay Afloat
The foundation behind the Gnome desktop environment is having to go through some serious belt-tightening due to continued financial problems.
-
Thousands of Linux Servers Infected with Stealth Malware Since 2021
Perfctl is capable of remaining undetected, which makes it dangerous and hard to mitigate.